Table of Contents
Advertisement
7. ACCESSORIES
7.1 Scale and tag marking
BA644DF-P PROFIBUS PA Indicators are fitted
with a blank escutcheon around the liquid crystal
display.
If specified when the instrument is
ordered, this can be supplied printed with units of
measurement and tag information, plus a scale for
the horizontal bargraph. Alternatively, information
may be added on-site via an embossed strip, dry
transfer or a permanent marker.
To gain access to the display escutcheon remove
the terminal cover by unscrewing the two 'A'
screws which will reveal two concealed 'D' screws.
Unscrew all four 'D' screws and carefully lift off the
front of the instrument.
screws is shown in Fig 2.
After adding the required legends, or fitting a new
pre-printed self-adhesive escutcheon, ensure that
the
gasket
is
correctly
reassembling the instrument enclosure.
7.2 Tag plate
The BA644DF-P can be supplied with a blank or
custom laser marked stainless steel plate secured
by two screws to the front of the instrument
enclosure. This plate can accommodate:
1 row of 9 alphanumeric characters 10mm high
or 1 row of 11 alphanumeric characters 7mm high
or 2 rows of 18 alphanumeric characters 5mm
high.
or 8 cells each containing units of measurement or
identification for one of the 8 inputs.
7.3 Pipe mounting kits
Two pipe mounting kits are available for securing
the BA644DF-P to a horizontal or vertical pipe.
BA392D Stainless steel bracket secured by two
worm drive hose clips for 60 to 80mm
outside diameter pipes.
BA393
Heavy-duty
secured by a single 'V' bolt. Will clamp
to any pipe with an outside diameter
between 40 and 80mm.
The location of these
positioned
before
stainless
steel
bracket
14
Advertisement
Table of Contents
