Philips 32PFL2507 User Manual page 28

Symptom
No picture or sound • Check if the Power is on.
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again.
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
• Make sure that the selected Input mode is connected to the working Input jack.
• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to
• Make sure that the sound is not muted. Press
• Make sure that the volume is NOT set to 0 or
No color • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
• Adjust Color in Picture settings.
No sound, distorted sound or • Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the VGA audio input(3.5mm) jack.
incorrect Audio Sound is heard
• When using Component Analog Video, Composite Analog Video make sure that the Analog Audio (L/R) connectors are mounted
when using the HDMI-DVI
connections.
Sound OK, picture poor • Electrical interference from nearby appliances may affect picture quality.
• Adjust Contrast and Brightness in Picture settings.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
• For the best picture quality, watch High Defi nition wide screen programs.
Picture OK, sound poor • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
• Check if the audio cable is connected into the unit correctly.
You see a distorted picture or • You may be getting interference from electrical appliances, automobiles, motorcycles or fl uorescent lights.
hear an unusual sound.
• Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture • Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
Different color marks on the TV • View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation.
screen
You switch to a different Input • This unit will memorize the volume level from the last time you adjusted it.
and the volume changes.
• If the volume of the sound from another device is higher or lower, then the loudness will change.
• Make sure Auto Volume is set to On.
You switch to a different Input • This unit will memorize the viewing mode from the last time you used the particular Input modes.
and the screen size changes.
• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press ASPECT repeatedly to
The display image does not
cover the entire screen.
Note
•
The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fi xed point of blue, green or red.
This is not to be considered a defect in the LCD screen.
•
Some functions are not available in specifi c modes, but this is not a malfunction. Read the description in this User Manual for more details on correct operations.
Remedy
wake up your computer.
➠
into the Audio (L/R) Input jacks.
If the HD content is not available, watch Standard Defi nition programs instead.
switch various screen modes.
so that the volume bar and current volume level will appear on the TV screen.
. If so, use + / − to adjust to the desired volume.
p. 17
➠
p. 17
➠
p. 17
28
English