Control Panel; Terminals - Philips 32PFL2507 User Manual

Control panel

f
a b

Terminals

Pr
h
HDMI
Pb
Y
YPbPr
i
VGA AUDIO
j
D-SUB(VGA)
k
g
c d e
l
m
n
o
p
q
VOL. ◄/►
a
Touch to adjust volume down (◄) / up (►) or to move
left (◄) / right (►) when selecting menu items.
PROG. ▲/▼
b
Touch to select channels or to move up (▲ ) / down (▼ ) when
selecting menu items.
MENU
c
Touch to display the main menu.
INPUT
d
Touch to select the connected devices.
(POWER / STANDBY)
e
Touch to Turn the unit On and go into Standby mode.
To completely Turn Off the unit, you must unplug the AC power
cord.
Power On indicator
f
Light up red when the unit is turned to Standby and Off when
the unit is turned On.
Infrared sensor
g
Receives IR signals from remote control.
HDMI Input jack
h
Digital audio and video Input from high defi nition Digital devices
such as Blu-ray disc players, cable boxes and satellite set-top
boxes.
VGA Audio cable connection for PC and HDMI-DVI
i
VGA cable connection for PC
j
Component Video (Y/Pb/Pr) Input jacks for VIDEO
k
USB terminal
l
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital
camera, keyboard, mouse, etc.
Digital audio (S/PDIF) Output to home theaters and other
m
Digital Audio systems
Composite Video Input jack for VIDEO
n
Analog Audio (L/R) Input jacks
o
Connect Analog Audio signals from;
- Component Video / Analog Audio (L/R) jacks signal
- Composite Video / Analog Audio (L/R) jacks signal
75 ohm Cable / Antenna connection
p
Signal Input from an antenna, cable or satellite.
Headphone Audio Output jack
q
Headphone 3.5mm stereo jack for personal listening.
10
English