Table of Contents
Advertisement
Attaching/Removing the
attachment
Attachment 53A
Attaching
■
Check the shape of front/back of
1
the attachment and the attaching
part of the desktop holder, then fit
the attachment with the desktop
holder.
Firmly press the attachment
2
straight and make sure that there
are no gaps between the
attachment and the desktop
holder.
Removing
■
Put your fingertip into the groove
1
on the one side of the attachment,
lift it up at a slant while pressing
the desktop holder, then remove it
( ).
Pit
Attachment 53B
❖ Note
You cannot charge the battery by connecting the
･
desktop holder to a PC.
Check the connecting direction to connect correctly.
･
Wrong connection may cause damage.
Attachment 53A is attached to the desktop holder by
･
default.
Attachment 53B only supports terminal covers with
･
"
(Compatible with genuine
純正卓上ホルダ対応
desktop holders)" mark and the terminal can be
charged on the desktop holder with a compatible
cover attached.
Before Using the Terminal
36
Advertisement
Table of Contents
