Download
Share
Print this page
AURO OtoSys IM100 Tutorial
  1. Manuals
  2. Brands
  3. AURO Manuals
  4. Diagnostic Equipment
  5. OtoSys IM100
  6. Tutorial

AURO OtoSys IM100 Tutorial

Hide thumbs Also See for OtoSys IM100:

Advertisement

Quick Links

Download this manual
Audi 2014 Q5-A001
TUTORIAL
www.aurodiag.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the OtoSys IM100 and is the answer not in the manual?

Questions and answers

Related Manuals for AURO OtoSys IM100

Summary of Contents for AURO OtoSys IM100

  • Page 1 Audi 2014 Q5-A001 TUTORIAL www.aurodiag.com...

  • Page 2: Disclaimer Of Warranties And Limitation Of Liabilities

    Any action you take upon the information from this manual is strictly at your own risk, Auro will not be liable for any direct damages or for any special, incidental, or indirect damages or for any economic consequential damages (including lost profits).

  • Page 3: Safety Information

    Safety Instructions The safety messages herein cover situations Auro is aware of. Auro cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any...
  • Page 4 DANGER When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon mo oxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.

  • Page 5: Table Of Contents

    CONTENTS ........................i RADEMARKS ....................i OPYRIGHT NFORMATION ..........i ISCLAIMER OF ARRANTIES AND IMITATION OF IABILITIES ....................i ERVICES AND UPPORT ......................ii AFETY NFORMATION ......................ii AFETY ESSAGES ....................... ii AFETY NSTRUCTIONS INTRODUCTION ........................1 ..................1 EARNING VIA MART ..................

  • Page 6: Introduction

    Introduction This manual introduces how to conduct 2014 Audi Q5 key learning with Auro OtoSys IM100 Smart Mode and Expert Mode. Two options are available when accessing the IMMO function:  Smart Mode – the IM100 tablet will read the vehicle information and analyze the IMMO part information automatically.
  • Page 7 Figure 2 Sample OtoSys Interface Tap Audi on the vehicle menu, then tap Smart mode, vehicle information interface displays, tap Yes to confirm and continue. NOTE You can click on the pen icon near the top-right corner to record the operation data. If you encounter any difficulties, click on the icon again to send us the data and the problem, so that our engineers could help.
  • Page 8 Figure 4 Sample Mode Selection Screen Figure 5 Sample Confirm Vehicle Information Screen Pay attention to the information displayed. Tap OK to check the key status. Then tap OK to the Function Select interface.
  • Page 9 Figure 6 Sample Information Screen Figure 7 Sample Key Status Screen Tap Immobilizer system status on the Function Select interface to check the current key(s) status again. Then tap OK to go back to the Function Select interface.
  • Page 10 Figure 8 Sample Function Select Screen Figure 9 Sample Key Status Screen Tap Key Learning on the Function Select interface. Key Learning proceeds automatically from reading IMMO data. NOTE It is normal if the ignition lights go out during the reading IMMO data process.
  • Page 11 Figure 10 Sample Function Select Screen Figure 11 Sample Reading IMMO Data Screen Make dealer key starts after finishing reading IMMO data. Tap Yes and proceed as information displayed to make dealer key. NOTE If key(s) need to be learned are already dealer key(s), tap No on the popup window and proceed as information displayed.
  • Page 12 Figure 12 Sample Information Popup Window Figure 13 Sample Information Popup Window Figure 14 Sample Make Dealer Key Screen...
  • Page 13 Figure 15 Sample Information Popup Window Select the number of keys that need to be learned after making dealer key. Tap OK to proceed. NOTE The number should be the sum of existing working keys brought with you and the new keys you want.
  • Page 14 Key learning starts automatically. Insert key(s) need to be learned as per information displayed. The key learning progress shows on the popup window. Figure 17 Sample Key Learning Process Screen Figure 18 Sample Key Learning Progress Screen Tap OK on the popup window after key learning completed. Check key status interface displayed automatically.

  • Page 15: Key Learning Via Expert Mode

    Figure 19 Sample Popup Window Figure 20 Sample Key Status Screen Key Learning via Expert Mode Turn on the IM100 tablet, tap OtoSys on the main interface screen, then IMMO. A vehicle menu displays and a disclaimer prompts up. Tap Accept to continue.
  • Page 16 Figure 21 Sample Main Interface Screen Figure 22 Sample OtoSys Screen...
  • Page 17 Tap Audi on the vehicle menu, then Expert mode on the mode selection interface. The Function Select interface displays. Figure 23 Sample Vehicle Brand Menu Figure 24 Sample Mode Selection Screen...
  • Page 18 Tap IMMO V > A4/A5/Q5, the Key Learning Function Select interface displays. Figure 25 Sample Function Select Screen Figure 26 Sample IMMO V Function Select Screen Tap Read IMMO data on the Key Learning Function Select interface. Pay attention to the Note interface for different scenarios. Proceed as information displayed. NOTE It is normal if the ignition lights go out during the reading IMMO data process.
  • Page 19 Figure 27 Sample Key Learning Function Select Screen Figure 28 Sample Information Screen...
  • Page 20 Tap OK to go back to the Function Select interface after finishing reading IMMO data. Figure 29 Sample Vehicle Anti-theft Information Screen Figure 30 Sample Communication Status Screen Tap Make dealer key on the Function Select interface, proceed as information displayed to make dealer key(s).
  • Page 21 Figure 31 Sample Key Learning Function Select Screen Figure 32 Sample Information Screen...
  • Page 22 Tap OK after finishing Make dealer key, go back to the Key Learning Function Select interface. Figure 33 Sample Communication Status Screen Figure 34 Sample Information Screen Tap Learn key. Select the number of keys that need to be learned. Tap OK to proceed.
  • Page 23 Figure 35 Sample Key Learning Function Select Screen Figure 36 Sample Input Information Screen Proceed as information displayed after inputting the key number. Key learning process displays on the interface.
  • Page 24 Figure 37 Sample Key Learning Process Screen 10. Key learning completes when the Key learning process completed interface displays. Tap OK, go back to the Key Learning Function Select interface. NOTE Tap Reset instrument on the Function Select interface if ignition lights go out after key learning completed.
  • Page 25 Figure 39 Sample Key Learning Function Select Screen Figure 40 Sample Check Key Status Screen...