Call Settings - TP-Link neffos N1 User Manual

Table of Contents

Advertisement

Edit numbers in blacklist
Go to Harassment filter, tap a number to edit it. Tap
View the locked messages and calls
Go to Harassment filter ->
Harassment filter settings
Go to Harassment filter ->
Block unknown number:
Block notification:
Turn on the switch to get reminders when your phone intercepts a harassing call or spam
message.
4. 7

Call settings

Go to
Phone ->
Call settings to configure the following call settings.
->
Note:
1.
The following features may vary depending on your carrier.
2.
If you insert two SIM cards and you don't set the default SIM card for calls, Select SIM for calls will display on the list.
You can choose your default for calls, or choose Ask every time.
Voicemail
Divert calls to your voicemail when your phone is switched off or when there is no cellular coverage. Callers can
leave a voice message which you can listen to later.
• Service: Your carrier.
Set up:
Tap Setup -> Voicemail number to enter your voicemail number and tap OK.
Sound:
Tap Sound and choose your voicemail prompt.
Vibrate:
Turn on the switch to enable vibrate when you receive a new woicemail.
Note:
Voicemail must be supported by your carrier. Please ensure that you have subscribed to this service. Contact your carrier for
information about their voicemail service.
Fixed Dialing Numbers
Use fixed dialing numbers to restrict outgoing calls to whitelisted numbers.
Enable FDN:
Tap Enable FDN, enter PIN2 and tap OK.
Change PIN2:
Tap Change PIN2 and follow the onscreen instructions to change your PIN2.
FDN list:
Tap FDN list to view your FDN numbers. Tap
Note:
1.
Your PIN2 code is required to enable fixed dialing numbers. To obtain your PIN2 code, contact your carrier.
2.
Numbers are added to the FDN list, and when activated, FDN restricts outgoing calls to only those numbers listed, or
to numbers with certain prefixes.
3.
PIN2 must be entered before hand or when applying such settings, which is unique to each card and initially provided
by the network operator.
Call forwarding
If your phone can not answer or you do not want to answer the call, you can transfer the call to another phone
number.
Calls
Chapter 4
Blocked numbers to view the blocked messages and calls.
->
Settings to configure the following settings.
->
Turn on the switch to block unknown numbers.
after finishing to save changes.
->
Add contact
to add a FDN number.
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tp908a

Table of Contents