Subscribe to Our Youtube Channel
Related Manuals for IOtech ADAC/5500 Series
Summary of Contents for IOtech ADAC/5500 Series
- Page 1 (217) 352-9330 | Click HERE Find the Measurement Computing / IOtech ADAC / 5502MF-V at our website:...
- Page 2 25971 Cannon Road Cleveland, OH 44146-1833 Phone: (440) 439-4091 Fax: (440) 439-4093 E-mail (sales): sales@iotech.com E-mail (post-sales): productsupport@iotech.com Internet: www.iotech.com 1107-0940, © 2002 by IOtech, Inc. rev. 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 3 Copyright, Trademark, and Licensing Notice All IOtech documentation, software, and hardware are copyright with all rights reserved. No part of this product may be copied, reproduced or transmitted by any mechanical, photographic, electronic, or other method without IOtech’s prior written consent.
-
Page 4: Table Of Contents
After installing the software and the board, you will need to configure the board. Although this document provides some notes regarding board configuration, you will need to refer to your PDF copy of the ADAC/5500 Series User’s Manual (p/n 1107-0905) for details. - Page 5 (see figure) The CA-G17-ADAC cables connect to 40-pin headers P3 (DIO2) and P5 (DIO3) located on ADAC Series board. ADAC/5500 Series, Possible Connections to Terminal Boards ADAC/5500 Series Installation Guide 1107-0940, rev 2.0 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 6: Install Software
3. After the intro-screen appears, follow the screen prompts. Upon completing the software installation, continue with step 2, Install Boards in Available PCI Bus-Slots. 1107-0940, rev 2.0 ADAC/5500 Series Installation Guide 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 7 ADAC/5500 Series Installation Guide 1107-0940, rev 2.0 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 8: Install Boards In Available Pci Bus-Slots
3. Choose an available PCI bus-slot. 4. Carefully remove ADAC/5500 Series Board from its anti-static protective bag. If you have not already done so, write down the serial number and type of ADAC board in the space provided on page 3 of this document. - Page 9 7. Align the groove in the ADAC/5500 Series board’s PCI edge-connector with the ridge of the desired PCI slot. See preceding right-hand figure. 8. Push the board firmly into the PCI slot. The board should “snap” into position. 9. Secure the board by inserting the rear-panel adapter-plate screw.
-
Page 10: Configure Boards
• The ADAC/5500 Series Boards each bring out ±15 V and +5 V to the main I/O connector (J1). In addition, the ADAC/5501MF, ADAC/5502MF, ADAC/5503HR and ADAC/5504HR bring +5 V to the auxiliary digital I/O connectors (P3 and P5), located on the backside of those boards. -
Page 11: Pinouts
Pinouts This section contains pinouts for the various ADAC/5500 Series Boards and the terminal boards that can be used with them, i.e., ADAC-TB-8, ADAC-TB-16, and DC-37. J1 Pin Assignments for ADAC/5500MF Only Standard 68-Pin SCSCI Type III, Socket (Female) Connector with Orb... - Page 12 Note 2: The clock source of the secondary DAC1 channel may be software command, DAC1 Pacer clock, or Channel 0 clock source. 1107-0940, rev 2.0 ADAC/5500 Series Installation Guide 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 13 A CA-G17-ADAC Cable, Installed Standard 40-Pin Male Headers Signal definitions for the P3 and P5 Auxiliary 40-Pin DIO headers and the DB37 connector follow. ADAC/5500 Series Installation Guide 1107-0940, rev 2.0 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 14 (Z off). 3.3 V CMOS signal. In regard to the G17 DB37 connector, pin-37 is used for the strobe signal. 1107-0940, rev 2.0 ADAC/5500 Series Installation Guide 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 15 Always turn the computer power OFF and unplug it before connecting or disconnecting a screw terminal panel or a cable to the PCI card. Failure to do so could result in electric shock, or equipment damage. ADAC/5500 Series Installation Guide 1107-0940, rev 2.0 908096...
- Page 16 PCI card. Failure to do so could result in electric shock, or equipment damage. 1107-0940, rev 2.0 ADAC/5500 Series Installation Guide 908096 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 17 37 terminal boards are required to access all 32 digital I/O channels. As depicted on page 4, each DC-37 terminal board can connect to an ADAC/5500 Series Board via a CA-G17-ADAC cable, or to an optional CA-G37-x-ADAC extension cable, which interfaces between a CA-G17 cable’s orb and the ADAC-DC-37 board.
Need help?
Do you have a question about the ADAC/5500 Series and is the answer not in the manual?
Questions and answers