Table of Contents
Advertisement
Manual Image Adjust
Adjustment Item
1,2
H./V. Position *
1
Clock *
1
Phase *
Sharpness
Video Mode Adjust
4
Blue Light Reducer *
X-Res Technology
1
*
Only Analog Input.
2
*
See page 22 for SCREEN ADJUSTMENTS.
3
*
It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video
resolution is 4:3, 5:4 or 16:10.
4
*
Blue Light Reducer is disabled when Color Adjust is activated.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Blue Light Reducer: Pressing and holding of the
not displayed.
Manual Image Adjust
Problem / Option
H. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
0 1 2 3
You can change the picture quality from 0 to 3 (soft to sharp).
Press the
order. Press the
reverse numerical order.
Adjust the picture quality at resolutions of less 1920 x 1080.
You can change the picture quality (4 steps).
Aspect Ratio *
Full Screen
Dot by Dot
Off
1
Direct
2
3
Off
Soft
Middle
Hard
Too left
Too right
Too low
Too high
Button to change the picture quality in numerical
Button to change the picture quality in
3
Expansion display of Aspect
Full screen display
Display the picture dot by dot.
Typical
Blue light is reduced.
Blue light is reduced more than Mode1.
Blue light is reduced more than Mode2.
Normal
Enhance the picture edge.
Enhance the picture edge more than the Soft option.
Enhance the picture edge more than the
Middle option.
Button for about 2 seconds when the Menu is
Button to Press
OPERATING THE MONITOR 19
Advertisement
Table of Contents
