Table of Contents
Advertisement
YBI-01A-BA-e-1620
CAUTION
Maintain and clean the ionizer at regular intervals.
● Clean the ion source after 100 hours.
● Replace the ion source after 10 000 hours.
Starting up a damaged ionizer may result in a short
circuit, fire or electric shock.
Starting up out of doors and inside vehicles is prohibited
and will result in total loss of warranty.
The occurrence of electromagnetic fields may result in
major display deviations (incorrect weighing results).
Discharge sample at a sufficient distance from the
weighing balance.
During normal operation the green LED will be glowing,
in case of a breakdown the red LED.
If the red LED is glowing, turn off the ionizer at the
master switch and turn it on again. If the red LED
continues to glow, inform the manufacturer.
The ionizer may heat up slightly during operation.
Prior to ionising powdery goods to be weighed, turn off
the fan.
Ionisation results are better when the fan is turned on
and the period required for discharging the sample will
be shortened.
5
Advertisement
Table of Contents
