Ryzen - DDR Maximum Frequency Support Table
Maximum
DDR4-2667
DDR4-2667
DDR4-2667
DDR4-2400
Note
» SR - Single-rank DIMM, 1R x4 or 1R x8.
» DR - Dual-rank DIMMs, 2R x4 or 2R x8.
» For the better DDR4 module compatibility, please follow the table to install your DDR4 modules.
2.5 Expansion Slots
PEX16_1: PCI-Express Gen3 x16 Slot (APU / NPU @x8 speed, Ryzen @x16 speed)
• PCI-Express 3.0 compliant.
• Theoretical maximum bandwidth using two slots simultaneously is 16GB/s for each slot,
a total of 32GB/s.
PEX1_1/1_2: PCI-Express Gen3 x1 Slot
• PCI-Express 3.0 compliant.
• Data transfer bandwidth up to 1GB/s per direction; 2GB/s in total.
Install an Expansion Card
You can install your expansion card by following steps:
• Read the related expansion card's instruction document before install the expansion
card into the computer.
• Remove your computer's chassis cover, screws and slot bracket from the computer.
• Place a card in the expansion slot and press down on the card until it is completely
seated in the slot.
• Secure the card's metal bracket to the chassis back panel with a screw.
• Replace your computer's chassis cover.
• Power on the computer, if necessary, change BIOS settings for the expansion card.
• Install related driver for the expansion card.
12 | Chapter 2: Hardware installation
DIMMA1
DIMMB1
SR
--
DR
--
SR
SR
DR
DR