Download Print this page

Apollo Sprayers T6000 Instruction Manual

Mist applicator

Advertisement

Quick Links

T6000 Mist Applicator
INSTRUCTION MANUAL
D
O NOT USE THE MIST APPLICATOR BEFORE READING THIS MANUAL
This manual contains important warnings and instructions.
Please read these instructions carefully and keep for your reference.
©2012 (Apollo Sprayers International, Inc.)

Advertisement

loading
Need help?

Need help?

Do you have a question about the T6000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Apollo Sprayers T6000

  • Page 1 T6000 Mist Applicator INSTRUCTION MANUAL O NOT USE THE MIST APPLICATOR BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep for your reference. ©2012 (Apollo Sprayers International, Inc.)
  • Page 2: Table Of Contents

    Take a minute to read and understand how to operate your new T6000 Mist Applicator™ and you will be able to provide the perfect tan with every application.
  • Page 3: General Safety Information

    General Safety Information: Read all instructions and safety precautions before operating the unit. THIS INDICATES A CONDITION THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE IF THE WARNING IS IGNORED. THIS INDICATES A CONDITION THAT COULD CAUSE SERIOUS INJURY OR LOSS OF LIFE IF THE WARNING IS IGNORED.
  • Page 4 General Safety Information cont’d.: • Tipping the Mist applicator causes the Mist applicator to clog. Dried spray material also clogs the pressure delivery tube and fittings. The Mist applicator does not function when clogging occurs. • When not in use, be sure to disconnect the hose and place the Mist applicator into the holder in the turbine to avoid tipping.
  • Page 5: Prepare The T6000 Mist Applicator

    Locate the air cap (#2) on the T6000 diagram. Slightly turn the air cap ring (#1) anti or counter clockwise to loosen the air cap. Notice that you can now rotate the air cap freely.
  • Page 6: T6000 Mist Applicator Diagram

    T6000 Mist Applicator Diagram...
  • Page 7: Adjusting Your Mist Applicator

    Mist applicator. e. In general, hold the T6000 Mist applicator 4” (10cm) from the person being sprayed. Moving the Mist applicator back will increase the size of the mist pattern. Moving the Mist applicator closer will decrease the size of the mist pattern.
  • Page 8: Maintenance

    1. You are now ready to begin misting. 2. The ON/OFF Switch is located under the carry handle of the T100 Turbo Unit. Turn it on. You will hear a sound similar to a vacuum cleaner. You may also notice that air is now blowing out of the front of the Mist applicator.
  • Page 9: Troubleshooting

    1. It is VERY important to clean your Mist Applicator daily. 2. At the end of the day or when the equipment will not be used any more, disconnect the Mist Applicator from the air hose. 3. Carefully unscrew the cup. If there is remaining solution, either close the cup with a cup lid, or pour the remaining solution into a proper storage container.
  • Page 10 T100 Turbo unit turned ON. Air blows out of T6000 Mist applicator? b. This is correct. Air blows constantly when Turbo unit is ON. c. T100 Turbo unit turned ON. Unit does not operate or blow air? d. Check that the unit is plugged in to proper electric source. Be sure there is power at the electric source.
  • Page 11: Warranty And Technical Support

    Six Month Limited Warranty This machine and Equipment is WARRANTED by APOLLO SPRAYERS INTERNATIONAL INC. for a total period of SIX MONTHS from the ORIGINAL date of purchase by the ORIGINAL PURCHASER. Proof of purchase to be included and all SHIPPING CHARGES to be pre-paid.