Eye Saver Mode; Game Mode; Response Time (S24F350Fh*/S24F352Fh*/ S24F354Fh*/S24F356Fh*/S24F359Fh*/ S27F350Fh*/S27F352Fh*/S27F354Fh*/ S27F358Fw*/S27F359Fh*/S32F351Fu*); Picture Size - Samsung S24F350FH Series User Manual

Eye Saver Mode

Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland "Low Blue Light Content" is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland "Low Blue Light Content" standards.

Game Mode

Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is
connected.
― This menu is not available when
Eye Saver Mode
― When the monitor turns off, enters power-saving mode or changes input sources,
even if it is set to On.
― If you want to keep
Game Mode enabled all the time, select
Response Time (S24F350FH*/S24F352FH*/
S24F354FH*/S24F356FH*/S24F359FH*/
S27F350FH*/S27F352FH*/S27F354FH*/
S27F358FW*/S27F359FH*/S32F351FU*)
Accelerate the panel response rate to make video appear more vivid and natural.
― It is best to set
Response Time to Standard
is 'On', the blue light that wavelength is around 400nm
is enabled.
Game Mode
Always On.
or Faster when you are not viewing a movie.

Picture Size

Change the picture size.
― This option is not available when
In PC mode
• Auto: Display the picture according to the aspect ratio of the input source.
• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
• 16:9: Display the picture with an aspect ratio of 16:9.
• Screen Fit: Display the picture with the original aspect ratio without cutting off.
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
― A digital output device is connected using the HDMI/DP cable.
turns Off
― The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
― This can only be set when the external input is connected through HDMI/DP and
FreeSync is enabled.
PC/AV Mode is set to AV.
30