Temperature Adjustment During Auto Mode; Fan Speed - Mitsubishi Heavy Industries SRK63ZRA-W User Manual

Temperature adjustment during AUTO mode

■ Default preset temperature during AUTO mode is 24°C for both cooling and heating mode. However, it can be adjusted (Minimum 18°C,
Maximum 30°C) using button or

FAN SPEED

■ The FAN SPEED can be set without DRY mode.
button.
1
When it is a little cold
Press the
■ Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the
■ Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
temp.(°C)
1
Operation capacity by your choice
Set automatically by microcomputer
Silent operation
Energy-saving operation
Standard operation
Powerful operation with high capacity
• When FAN SPEED is changed from Hi to Lo or ULo, the sound of
refrigerant may be heard.
– 14 –
Press the" or (TEMP)" button.
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Remote Control display
-6 -5 -4 -3 -2 -1
18 19 20 21 22 23
Press the FAN SPEED button.
Each time the button is pressed, the fan speed changes.
AUTO ULo
NOTE
+ 0
+1 +2 +3 +4 +5
24 25 26 27 28 29
Lo Me Hi
FAN SPEED
AUTO
ULo
Lo
Me
Hi
+6
30