Table of Contents
Advertisement
REAR
34
15. Direct Channel Selection buttons (0-9) - Allows
direct access to any channel.
16. STOP button - Press to stop the tape.
17. MENU button - Press to display the on-screen menu
function.
18. TRACKING SET + / – buttons - During playback, they
are used to adjust tracking manually. Used to set or
adjust in the menu mode.
19. TIMER button - Used to set the VCR to start record-
ing at a preset time.
20. SLOW button - Press to play back a tape in slow mo-
tion or to advance the tape one frame at a time during
still playback.
21. COUNTER RESET button - Resets the Real Time
Tape Counter to 00:00:00.
22. TV/VCR selector button - Switches between TV
and VCR.
23. PAUSE/STILL button - During recording, this
button temporarily stops the tape. The "
appear on the screen. During playback, it stops the
tape and displays a still image on the TV screen.
24. ENTER button - Used to enter the information in the
menu mode.
4F11701A P08-13
25. DIGITAL TRACKING button - Allows automatic
adjustment of tracking to minimize picture noise
during playback.
26. CANCEL button - Used to clear the selected timer
recording program.
27. INPUT SELECT button - Switches the program for
viewing between the VCR and external input
sources.
28. DISPLAY button - Displays the present time/day of
the week, channel, counter, speed selection and VCR
mode on the TV screen.
29. SP/SLP selector button - Sets the tape speed for
recording.
30. AUDIO VIDEO OUT Jacks - Use to output audio and
video signal to a TV, amplifier or VCR.
31. UHF/VHF IN (ANT) Jack - Connect a UHF/VHF
antenna or CATV cable to this jack.
32. UHF/VHF OUT (TV) Jack - Use to output UHF/VHF
" will
or CATV signal to a TV.
33. AUDIO/VIDEO IN (LINE1) Jacks - Audio and video
signal cables from an external source can be con-
nected here.
34. AC Power Cord - Connect to a 120V 60Hz outlet.
9
30
31
UHF/VHF
OUT
LINE1
IN(ANT)
VIDEO
OUT(TV)
AUDIO
33
32
9
10/16/01, 1:34 PM
Advertisement
Table of Contents
