Toshiba M4F2C Owner's Manual page 11

VCR TO TV CONNECTION
After you have connected the antenna to the VCR, you must connect the VCR to the TV.
Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs
(numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.
IN
OUT
75 ohm Coaxial Cable (supplied)
IN
75 ohm Coaxial Cable
OUT
(supplied)
IN
75 ohm Coaxial Cable
(supplied)
OUT
4F11701A P08-13
TV
VHF/UHF IN
TV
Splitter
75 ohm Input
UHF
75/300 ohm outputs
(not supplied)
VHF
TV
UHF
Splitter
75 ohm Input
300 ohm outputs
(not supplied)
VHF
11
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with single 75 ohm
VHF/UHF antenna input
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHF
and 75 ohm VHF
antenna inputs
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHF
and 300 ohm VHF
antenna inputs
10/16/01, 1:34 PM
11