1. Manuals
  2. Brands
  3. Harsper Manuals
  4. Monitor
  5. HL-3710V
  6. Manual

Harsper HL-3710V Manual

Hide thumbs Also See for HL-3710V:
Table of Contents

Advertisement

Quick Links

Download this manual
Foreword
Caution ........................................................................................................................................ 3
Important Safety Information .................................................................................................... 5
Overviewing the Monitor
Viewing the Control Panel ........................................................................................................ 9
Viewing the Connecting Panel ............................................................................................................ 10
- Button Description ............................................................................................................................ 12
- PIP (Picture in Picture) Buttons ...................................................................................................... 13
- Loading the Batteries........................................................................................................................ 15
Table Stand Installation ............................................................................................................ 16
Speaker Installation .................................................................................................................. 17
Connecting the TV Cable .......................................................................................................... 18
Connecting the VCR .................................................................................................................. 19
Connecting the DVD .................................................................................................................. 20
Connecting the Set Top Box .................................................................................................... 21
Connecting the PC [ D-Sub & DVI ] .......................................................................................... 22
- Displayable Monitor Specification.......................................................................................... 23
Setting the Channel
Basic Operation.......................................................................................................................... 24
OSD Menu Structure .................................................................................................................. 25
Choosing the Channel Type...................................................................................................... 26
Storing the Channel Automatically .......................................................................................... 26
Fine Tuning the Channel Reception ........................................................................................ 27
Setting the Favorite Channel .................................................................................................... 28
Changing the Picture Mode ...................................................................................................... 29
- Adjust User Mode ................................................................................................................ 30
Changing the Color Temperature ............................................................................................ 32
Video NR (Noise Reduction) .................................................................................................... 32
Selecting the Film Mode............................................................................................................ 33
Changing the Screen Form ...................................................................................................... 33
Contents
1
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HL-3710V and is the answer not in the manual?

Questions and answers

Related Manuals for Harsper HL-3710V

Summary of Contents for Harsper HL-3710V

  • Page 1: Table Of Contents

    Contents Foreword Caution ............................3 Important Safety Information ....................5 Overviewing the Monitor Viewing the Control Panel ......................9 Viewing the Connecting Panel ......................10 Viewing the Remote Control - Button Description ..........................12 - PIP (Picture in Picture) Buttons ...................... 13 - Loading the Batteries........................
  • Page 2 Contents Setting the Black Enhancer......................34 Adjusting the PC Screen (Geometry) ..................35 - Native Mode .......................... 36 Setting the Sound Adjusting the Sound Balance ....................37 Changing the Sound Mode ......................37 Adjusting the User Sound Mode....................38 Spatial Effect..........................38 AVC (Auto Volume Control) ......................

  • Page 3: Caution

    Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT OPEN - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER CAUTION (OR BACK), NO USER-SERVICEABLE PARTS...
  • Page 4 Caution Always be careful when using your the monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3.

  • Page 5: Important Safety Information

    Important Safety Information Follow all operating and use Unplug the monitor from the Never add any attachments instructions. wall outlet before cleaning. and/or equipment without Use a damp cloth; do not use approval of the manufacturer. liquid or aerosol cleaners. Such additions can increase the risk of fire, electric shock, or other personal injury.
  • Page 6 Important Safety Information Provide ventilation for the monitor. The unit is designed Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of with slots in the cabinet for ventilation to protect it from this product is AC100-240V, the power cord attached overheating.
  • Page 7 Important Safety Information Do not overload the wall outlet or Do not insert anything through the Bend antenna cable between extension cords. Overloading can openings in the unit, where they inside and outside building to result in fire or electric shock. can touch dangerous voltage prevent rain from flowing in.
  • Page 8 Important Safety Information When replacement parts are Upon completion of any service or If you make adjustments yourself,adjust required, be sure the service repairs to this the monitor, ask the only those controls that are covered by technician uses replacement parts service technician to perform the operating instructions.

  • Page 9: Viewing The Control Panel

    Viewing the Control Panel OSD Button Position Front Panel OSD Button & Function Input Source Select Up (See the box below) Down (See the box below) Power (Standby) Remote Sensor Status/Power Indicator LED OSD Button Function INPUT SELECT Select the signal source from multiple input sources such as TV, AV 1, AV 2, S-Video/AV 3, Component 1, Component 2, PC and DVI.

  • Page 10: Viewing The Connecting Panel

    Viewing the Connecting Panel Back Panel and Jacks < Back panel of the monitor > RS-232C To Control from PC For PC, Set Top Box D-Sub(PC), DVI Sound PC/DVI Audio Input D-Sub (PC) For PC, Set Top Box Component 1, 2 For DVD, Set Top Box Component Sound For Component Audio Input...
  • Page 11 Viewing the Connecting Panel RS-232C Jack Connects a control signal from a PC. DVI Input Jack Connects a digital video signal from a DVI output jack of PC or set top box. D-Sub(PC), DVI Sound Connects a sound signal from PC or DVI. RGB PC Input Jack (D-Sub) Connects a video signal from a video output jack of PC.

  • Page 12: Viewing The Remote Control

    Viewing the Remote Control Button Description Power Turn the monitor on and off. Mute Temporarily cut the sound and restore it. Pre.CH Turn to the previous channel or exit OSD. V.Size Choose the screen form. 16:9 ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 Favorite Tune to your next favorite channel.

  • Page 13: Pip (Picture In Picture) Buttons

    Viewing the Remote Control Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ SAP • You can select only available modes depending on the source. CH INFO Display the current information about time, screen form, source and MTS mode.
  • Page 14 Viewing the Remote Control MOVE button : Move the position of PIP window. Left Up Right Up (Start) Left Down Right Down SWAP button : Swap the sources of the main screen and PIP window. MODE button : Change the PIP window mode. OFF ➔...

  • Page 15: Loading The Batteries

    Viewing the Remote Control Loading the Batteries Press on the cover and slide Load two AAA batteries, taking Close the cover until it clicks. care that the + and - ends face in the direction of the arrow. the correct direction. Reception Range of Remote Control Upper Lower...

  • Page 16: Installation

    Installation Table Stand Installation (Optional) < The monitor can be installed on the desk as shown above. > • Table stand mount minimum allowable clearances for adequate ventilation. 1.18 inch (3cm) 4 inch(10.16cm) 4 inch 4 inch (10.16cm) (10.16cm) 2.36 inch (5.99cm) Installation OWNER'S MANUAL...

  • Page 17: Speaker Installation

    Installation Speaker Installation (Optional) * CAUTION : Please make sure speaker wires should be connected as above, ferrite core are to be nearer to the main unit not to speakers to avoid possible electromagnetic-interference. • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want.

  • Page 18: Connecting The Cable/Devices

    Connecting the TV Cable TV Antenna Cable Connecting the TV Cable Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. Use CH+/CH- button or numeric button to change TV channel for your channel selection. Press Pre.CH button on the remote control to tune the previous channel.

  • Page 19: Connecting The Vcr

    Connecting the VCR AV 3 Input Sound of S-Video AV 2 S-Video/AV AV 1 Connecting the VCR With S-Video Connect a S-Video cable to the S-Video jacks of the VCR and the monitor. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the monitor. With AV Input Connect a composite cable to the AV video jacks of the VCR and the monitor.

  • Page 20: Connecting The Dvd

    Connecting the DVD Connecting the DVD • Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the Component jacks on the monitor. • Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the Component jacks on the monitor.

  • Page 21: Connecting The Set Top Box

    Connecting the Set Top Box How to Connect Connect Set Top Box (STB) video inputs to AV, Component, PC or DVI jacks on the monitor. Audio inputs to audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs. How to Use Supported Signals Component 1...

  • Page 22: Connecting The Pc [ D-Sub & Dvi ]

    Connecting the PC [ D-Sub & DVI ] D-Sub 15pin (VGA) from PC DVI from PC Connecting a PC to the monitor • There are two connectors to connect the monitor and PC: D-Sub and DVI. • D-Sub Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the monitor. •...

  • Page 23: Displayable Monitor Specification

    Displayable Monitor Specification Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 70.09 31.468 640 x 350 37.861 85.08 31.469 70.08 640 x 400 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 640 x 480 43.269 85.00 45.913 90.03 53.011 100.04 120.000 64.062...

  • Page 24: Basic Operation

    Basic Operation Turning the Monitor ON/ OFF Press the Power button on the remote control. The monitor will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Select Source Press INPUT button on the remote control.

  • Page 25: Osd Menu Structure

    OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. Example of OSD Menu Picture Mode Standard...

  • Page 26: Choosing The Channel Type

    Setting the Channel Choosing the Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC). Press Menu/Set button to display the main OSD menu.

  • Page 27: Fine Tuning The Channel Reception

    Setting the Channel Fine Tuning the Channel Reception The fine tuning function lets you manually adjust the monitor's tuner if you have difficulty tuning analog channels. Press Menu/Set button to display the main OSD menu. Channel Type NTSC - CATV Select the TV main menu item.

  • Page 28: Setting The Favorite Channel

    Setting the Channel Setting the Favorite Channel You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the Favorite button on the remote control, the monitor display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels.

  • Page 29: Setting The Picture

    Setting the Picture Changing the Picture Mode Your the monitor has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing PICTURE button on the remote control (or by making a selection from the menu).

  • Page 30: Adjust User Mode

    Setting the Picture Adjust User Mode You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in user mode. Select the item to adjust with CH+/CH- button. Select User mode (Previous page) Press Menu/Set button. Adjust the item with VOL+/VOL- button. Contrast To cancel all adjust, select Recall and press Menu/Set button.
  • Page 31 Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct Vague Brightness Adjust brightness of the screen. Dark Bright Color Adjust deep and light color of the screen. Decrease Increase Tint Adjusts the balance between green and yellow.

  • Page 32: Changing The Color Temperature

    Setting the Picture Changing the Color Temperature Your the monitor has 5 screen temperatures (color settings): Press Menu/Set button to display the main OSD menu. Mode Standard Select the Picture main menu. Temperature Normal Video NR Press Menu/Set button to enter the picture menu. Film Mode Select Temperature and press Menu/Set button to enter the sub menu.

  • Page 33: Selecting The Film Mode

    Setting the Picture Selecting the Film Mode This mode is in order to watch a movie composed of 24frames smoothly when the movie is converted to 30frames on TV. Press Menu/Set button to display the main OSD menu. Mode Standard Select the picture main menu item.

  • Page 34: Setting The Black Enhancer

    Setting the Picture Screen Form Description 16:9 16:9 video : No change. 4:3 video : Expands 4:3 video signal horizontally to fit the 16:9 screen. Panorama 16:9 video : No change. 4:3 video : Expands 4:3 video horizontally to fit the 16:9 screen and to minimize distortion, sides are expanded more than center.

  • Page 35: Adjusting The Pc Screen (Geometry)

    Setting the Picture [ PC ] In PC mode, you can adjust the H, V-Position, Native Mode, and Phase. Also you can adjust them automatically. Adjusting te PC Screen (Geometry) You can change H, V-Position, Native Mode, and Phase in PC mode like usual PC monitors. You can also adjust them automatically.

  • Page 36: Native Mode

    Setting the Picture [ PC ] H-Position V-Position Phase Mismatch Match Native Mode When you use monitor, native mode display all timing to 1366 x 768 mode. When you off native mode, monitor display 1366 x 768 mode expect 1360 x 768. Select Native Mode menu and press VOL+ button H-Position to enter the...

  • Page 37: Setting The Sound

    Setting the Sound In Sound menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Adjusting the Sound Balance This control allows you to adjust the balance of the left and right speaker output. Press Menu/Set button to display the main OSD menu.

  • Page 38: Adjusting The User Sound Mode

    Setting the Sound Adjusting the User Sound Mode You can use the OSD menu to change the treble, Bass, Balance, and DRC according to your preference. Equalizer menu appear when you select User mode. Select User mode (Previous page) Select a gain bar with VOL+/VOL- button on the remote control and adjust it with CH+/CH- button.

  • Page 39: Mts (Multichannel Television Sound)

    Setting the Sound MTS (Multichannel Television Sound) Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats. Press Menu/Set button to display the main OSD menu. Balance Select the Sound main menu with CH+/CH- button User Sound Mode on the remote control.

  • Page 40: Setting The Others

    Setting the Others In Setup menu, you can adjust the transparency of the OSD menu and set PIP and others. Adjusting the Transparency of the OSD Window Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. Press Menu/Set button to display the main OSD menu.

  • Page 41: Choosing The Source In Pip

    Setting the Others Small Large Twin Choosing the Source in PIP Change the source of the PIP window. Size Small Select Source and press Menu/Set button to enter the Source sub menu. Then the PIP sub menu appear. Picture Swap The available sources will be displayed.

  • Page 42: Changing The Position In Pip

    Setting the Others Changing the Position in PIP Change the position of the PIP window. Select Position with CH+/CH- button on the remote control and press Menu/Set button to enter the sub menu. Size Small Then the PIP sub menu appear. Source In sub menu, there are four positions.

  • Page 43: Set Id

    Setting the Others Set ID Set the ID of the monitor for mass-controlling through the serial port. Select Set ID and press VOL+ button to enter the Set ID part. Then the cursor moves into the part. Blue Back Adjust with CH+/CH- button and press Back button. Language English Front Key Lock...

  • Page 44: V-Chip (Tv Parental Guidelines)

    Setting the Others V-Chip (TV Parental Guidelines) Parental restrictions can be Setup using either of two methods: The TV guidelines or the MPAA rating. Press Menu/Set button to display the main OSD menu. Translucent Select the Setup main menu with CH+/CH- button on the remote control.

  • Page 45: Tv Blocking In V-Chip

    Setting the Others TV Blocking in V-Chip You can Setup restrictions using the "TV Parental Guidelines" of FCC. Select TV Blocking with CH+/CH- button on the remote control and press Menu/Set button to enter the sub TV Blocking menu. Then the TV Blocking sub menu appear. Movie Blocking You can independently lock the TV ratings.

  • Page 46: Change Password In V-Chip

    Setting the Others Change Password in V-Chip Select Change Password with CH+/CH- button on the TV Blocking remote control and press Menu/Set button to enter the sub menu. Then the password change sub menu appear. Movie Blocking Change Password Enter the new password with numeric buttons on the remote control.

  • Page 47: Setting The Time

    Setting the Time In the Time menu, you can set the current time and auto power On/Off. Setting the Current Time Set the current time. Press Menu/Set button to display the main OSD menu. AM 03:29 Time Set Select the Time main menu. On Time AM 05:11 ON On Channel...

  • Page 48: Setting The On Channel

    Setting the Time Setting the On Channel Set the channel when the monitor power turn on automatically. Available only when the time is set and on time is on. Press Menu/Set button to display the main OSD menu. AM 03:29 Time Set Select the Time main menu with CH+/CH- button on AM 05:11 ON...

  • Page 49: Setting The Off Time

    Setting the Time Setting the Off Time This the monitor can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the monitor's clock as described previously. Press Menu/Set button to display the main OSD menu. Time Set AM 03:29 Select the Time main menu with CH+/CH- button on...

  • Page 50: Troubleshooting

    Troubleshooting If your monitor is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Problem Quick Action for Possible Solution No picture & no sound • Check whether the monitor is turned on. •...

  • Page 51: Warranty Card

    Memo OWNER'S MANUAL...
  • Page 52 Memo OWNER'S MANUAL...
  • Page 53 Memo OWNER'S MANUAL...
  • Page 54 Memo OWNER'S MANUAL...

This manual is also suitable for:

Hl-4010vHl-3210vHl-5500vHl-4210v

Table of Contents