Table of Contents
Advertisement
Recording & Playback
An important feature of your PVR is the record and playback function. The internal hard drive can store more
than 60 hours of digital TV broadcast (depending on the data rate of the recorded programme) which is set
automatically by the broadcaster) and the following chapter will help you to make full use of it.
The PVR record and playback functions are very similar to those of a VCR. The buttons used for playback
and recording are shown below.
•
The record key starts recording the programme on the current channel.
To automatically record for 30 minutes press the record button again, to record for 60 minutes press the
record button a third time etc.
The PVR will continue recording until the set duration expires.
•
The playback key opens the Recordings list screen where you a previously recorded events can be
selected for playback. (See the chapter Recordings list for detailed information)
•
The pause key pauses either record or playback. Pressing play will resume normal playback.
•
Once the playback is paused, advance the recording one frame at a time by repeatedly pressing the
pause key.
•
Pressing fast forward in pause mode activates slow motion playback. Repeatedly pressing the fast
forward key cycles through 1/8x, 1/4x and 1/2x slow motion speeds.
•
During normal playback, skip forwards or backwards two minutes by pressing either the right or left cursor
buttons respectively.
•
The stop key stops either record or playback.
•
The rewind and fast forward keys can be used to navigate during playback. Pressing either key
repeatedly will change the rewind / forward speed. Please note the OSD symbols indicating whatever
function is active during playback.
When you press the i-button during playback and recording, the I-Bar will be displayed in the upper part of
the TV screen as shown below.
Current Mode, eg
Play, pause, search
etc
The yellow part of the bar represents the recorded portion of the programme and the small red bar is the
current position within that record. The elapsed time is also shown.
Timeshift
Timeshift can be used as follows:
There is an interruption while watching TV. Maybe the telephone rings or somebody is at the door.
Timeshift can be used to effectively pause the current TV event and continue watching after the
GHDD1782DVBT User Guide
Record
Rewind
Progress indicator
Play
Pause
Fast Forward
Stop
21
Elapsed Time
Advertisement
Table of Contents
