Sharp NAR0051 Manual page 62

Inserting a Floppy Disk
Hold the floppy disk with the arrow facing up and towards the drive. Slide the disk
into the drive until it is locked into place.
• Always insert a floppy disk straight into the floppy disk drive.
• When inserting the disk, make sure it is not upside down.
4
• Do not use excessive force when inserting the floppy disk. If you have
difficulty inserting or removing disks, seek the assistance of an
authorized service technician.
• Do not touch the disk while reading/writing data. It may cause
malfunction of your computer and the drive.
Ejecting Floppy Disk
Before ejecting the floppy disk, make sure the indicator of the floppy disk
drive unit is not lit.
Press the eject button firmly. The disk will pop out slightly. Remove it and store it
properly.
4-4
Arrow Facing Up
Indicator
Eject Button