Gigabyte GA-K8N51PVMT-9 User Manual page 69

Completing the RAID BIOS Setup
After assigning your RAID array disks, press F7. The Clear disk data prompt appears.
RAID Mode: Mirroring
Free Disks
Loc Disk Model
[ESC] Quit [F6] Back
Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if
the drives were previously used as RAID drives. The Array List window appears, where you can review the
RAID arrays that you have set up.
You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow
keys to select the array, then press B to specify the array as bootable.
Boot
No
[Ctrl-X] Exit
MediaShield RAID Utility July 27 2005
- Define a New Array -
Striping Block:
Clear disk data ? Array Disks
Capacity
[Y] YES [N] NO
[ ] Add
[ ] Del
[F7] Finish [TAB] Navigate
MediaShield RAID Utility July 27 2005
- Array List -
Id Status Vendor
2 Healthy NVIDIA
[ ] Select [B] Set Boot
- 69 -
Optimal
Loc Disk Model
1.0.M ST3120026AS
1.1.M ST3120026AS
[ ] Select [ENTER] Popup
Array Model Name
MIRROR 111.79G
[N] New Array [ENTER] Detail
Capacity
Appendix