Flip Removed - Sony Ericsson 910i User Manual

This is the Internet version of the user's guide. © Print only for private use.
The Jog Dial provides further navigation and selection
capability. Closing the flip generally ends an activity and saves
the data. Multimedia phone calls and data sessions will,
however, continue.
When the flip is opened, the large touch-screen is revealed. You
use the stylus to tap the screen to navigate and enter data. There
is also a handwriting recognition feature, so that you can use the
stylus to write on the screen.
The Jog Dial provides further navigation and selection
capability. Closing the flip generally ends an activity and saves
the data. Multimedia phone calls and data sessions will,
however, continue.
A Shortcut to the Messages application
B Shortcut to the Contacts application
C Shortcut to the Phone application
D Shortcut to the Calendar application
E Shortcut to the Internet application
F Shows all applications available in flip open mode
You can change the shortcuts A-E. See 'Changing your
application shortcuts' on page 142.
Navigation
When the flip is open, the application shortcut icons shown in
the flip closed mode move to the top row in the flip open screen.
You navigate by using the stylus and tapping selected items and
by using the Jog Dial, see 'Jog Dial' on page 19.

Flip removed

The flip can also be removed, which makes the organizer
applications easier to access. When the flip is removed, the
P910i works in flip open mode.
Note Turn off the P910i before you remove the flip to avoid to
damage your phone.
To remove and attach the flip, refer to the separate instructions.
Note Please note that Sony Ericsson does not accept any
liability for lost parts or product defects resulting from any
disassembly or modification of the product.
Virtual flip
You can use a virtual flip when the real flip is removed. Tap the
checkbox in
Enable virtual flip
and select the check box to activate it. When the virtual
settings
flip is enabled, is shown on the status bar when the virtual
flip is open. Select to 'close' the virtual flip.
When the virtual flip is closed, the virtual flip keypad is shown.
Select to 'open' the virtual flip.
Control Panel > Other > Flip
Getting to know your P910i 17