Table of Contents
Advertisement
01. Power (Command2:a)
G To control Power On/Off of the Monitor.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0: Power Off
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0: Power Off
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit 'FF' data
based on this format, acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b)
G To select input source for the Monitor.
You can also select an input source using the INPUT
SELECT button on the Monitor's remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: RGB 1
1: COMPONENT
2: VIDEO
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command2:c)
G To adjust the screen format (main picture format).
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 0: Wide screen (16:9)
1: Normal screen (4:3)
2: Full screen (Zoom)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
* Using the PC input, select either 16:9 or 4:3 screen aspect
ratio.
26
1: Power On
1: Power On
3: S-VIDEO
4: RGB 2
04. Screen Mute (Command2:d)
G To select screen Mute On/Off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0: Screen mute off (Picture on)
1: Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command2:e)
G To control volume Mute On/Off.
You can also turn Mute on/off using the MUTE button
on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0: Volume mute on (Volume off)
1: Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command2:f)
G To adjust Volume.
You can also adjust sound with the volume buttons on
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
* Refer to 'Real data mapping1'. See page 27.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g)
G To adjust Screen Contrast.
You can also adjust Contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
* Refer to 'Real data mapping1'. See page 27.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Advertisement
Table of Contents
