Sun joe MTS-1300PW-RM Operator's Manual page 9

Fig. 3
Push to release
High-pressure hose
2. Connect the other end of the high-pressure hose to
the water outlet on the pressure washer (Fig. 4). First,
push the high-pressure hose end completely onto the
high-pressure water outlet, then screw it on clockwise.
Fig. 4
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
3. Connect the garden hose adapter (female coupler) to the
water inlet of the pressure washer, then thread your garden
hose (male end) into the garden hose adapter (Figs. 5 – 6).
The garden hose must have an internal diameter of at least
13 mm (1/2 in.) and must be reinforced. The water supply
must be at least equal to the washer delivery capacity.
NOTE: The machine is not suitable for connection to
the potable water main.
RELEASE
Trigger gun
Water outlet
High-pressure hose
Fig. 5
Garden hose
Water inlet
adapter
Fig. 6
4. Attach garden hose to water supply (Fig. 7).
Fig. 7
Connect to water supply
Garden hose
m
WARNING!
Do not connect to potable water system.
m
WARNING!
If connection is made to a potable water
system, the system shall be protected against backflow
m
WARNING!
The intake water temperature must
not exceed 104ºF/40ºC. The water supply must not
exceed 0.7 MPa.
9
Garden hose This end to
(male end) water inlet
Garden hose