Table of Contents
Advertisement
Unpacking
Carton Contents
• Electric pressure washer with detergent spray bottle
• Trigger gun
• Spray wand assembly
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Garden hose adapter (female coupler)
• Manual with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
customer service center at
®
Assembly
Spray Gun Assembly
1. Fit the two pieces of the spray wand assembly together
and rotate it until the two parts are completely locked
(Fig. 1).
Fig. 1
2. Fit the spray wand assembly into the gun and turn the
rotatable end-piece of the wand until the two parts are
completely locked (Fig. 2).
Fig. 2
Spray wand assembly
Connect the Spray Gun to the Pressure
Washer
1. Connect the quick-connect end of the high-pressure hose
to the trigger gun (Fig. 3). You will hear a click when it
snaps into place. To release the high-pressure hose from
the trigger gun, push the release button on the trigger gun.
8
Trigger gun
RELEASE
Advertisement
Table of Contents
