Summary of Contents for Martha Stewart MTS-EST22-RM
Page 1
ELECTRIC SNOW THROWER 22IN | 15 AMP | LED LIGHTS OPERATOR’S MANUAL Model MTS-EST22-RM Form No. SJ-MTS-EST22-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com...
ELECTRIC SNOW THROWER 22IN | 15 AMP | LED LIGHTS OPERATOR’S MANUAL Model MTS-EST22-RM Form No. SJ-MTS-EST22-RM-880E-V1 IMPORTANT! electric shock. There is an increased risk of electric shock if your body is earthed or grounded. Safety Instructions 6. Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts.
Page 3
Electrical Safety WARNING 1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the snow thrower. Receptacles are available having Electric shock may cause SEVERE INJURY or built-in GFCI protection and may be used for this DEATH.
Safety Instructions for Walk-Behind Personal Safety Snow Throwers 1. Stay alert – Watch what you are doing and use common sense when operating the snow thrower. Do not use the • Read the operator’s manual carefully – Learn your machine when tired, ill, or under the influence of drugs, snow thrower’s applications and limitations as well as the alcohol, or medication.
Page 5
• When work is completed – Disconnect the snow thrower from the power source when not in use, when changing accessories, and before performing any maintenance function. • Store safely – Store the snow thrower indoors in a dry area between uses. Keep it in a locked area, where children and unauthorized users cannot gain access.
Safety Symbols The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Disconnect the plug before conducting maintenance or when it is and follow all instructions in the...
Know Your Electric Snow Thrower Read the owner’s manual and safety rules carefully before operating your electric snow thrower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Unpacking Handle Frame Assembly 1. For easy assembly, the unit comes complete with most parts already connected. To complete the handle Carton Contents: assembly, simply pull the middle frame back and pull the • Electric snow thrower with middle frame and upper frame upper frame up (Fig.
Chute Crank Assembly Fig. 3 1. Slide the upper chute crank through the rubber ring located on the middle frame (Fig. 6). Upper Fig. 6 frame Upper chute crank Knob + T-bolt Rubber ring Middle frame Discharge Chute Assembly 1. Loosen the knob to lift the chute deflector (Fig. 4). 2.
4. Align the screw holes and tighten the thumbscrew by hand (Fig. 9). Fig. 11 Fig. 9 Thumbscrew WARNING! Damaged electrical cords present risk of fire, electrical shock, and serious bodily injury. Before operating the snow thrower, carefully examine the electrical cord. If the cord is damaged, do not use the snow Operation thrower.
Page 11
Headlights 6. While moving the snow thrower, do not drag the power cable violently or roughly. The snow thrower should move The snow thrower is equipped with 2 headlights that can be within the range that the cable can reach. used to illuminate the forward path in the dark.
Fig. 14 Fig. 16 Chute crank Deflector knob WARNING! Make sure that the chute deflector snaps Discharge and locks completely onto the discharge chute. An opening chute between the discharge chute and the chute deflector may allow foreign objects to be picked up by the snow thrower and thrown in the direction of the operator causing serious boldly injury.
Page 13
5. Do not use detergent or solvents as these could cause Fig. 19 irreparable damage to the snow thrower. Chemicals can destroy the plastic parts. Metal frame 6. To protect the snow thrower from corrosion when storing for long periods, lightly oil the metal parts. 7.
Page 14
Replacing the Belt + Pulley Fig. 24 NOTE: Determine the left and right hand side of the snow thrower by standing behind the unit in the normal operating position. Screw 1. Remove the screws from the left panel of the snow thrower and remove the left panel (Fig.
(Model SJCVR-24) for added protection. Visit snowjoe.com to purchase the cover online. Service + Support If your Martha Stewart MTS-EST22-RM electric snow thrower ® requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model + Serial Numbers...
Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this electric snow thrower. Contact Snow Joe + Sun Joe ®...
Page 19
SNOW JOE + SUN JOE REFURBISHED GOODS WARRANTY ® ® GENERAL CONDITIONS: Snow Joe + Sun Joe may from time to time change the design ® ® of its products. Nothing contained in this warranty shall be Snow Joe + Sun Joe operating under Snow Joe , LLC warrants ®...
Need help?
Do you have a question about the MTS-EST22-RM and is the answer not in the manual?
Questions and answers