HP f560x User Manual page 51

Menu option
Resolution
EV
LCD Setting
Voice Record
Key Tone
Volume
Record Interval
Parking Mode
Collision
Detection
Driver Fatigue
Alert
Description
Setting of video resolution.
Setting of exposure value.
Set LCD off time.
Camcorder screen will be
off after a set time if no
operation is detected during
the standby or record mode.
Press any button will switch
it on. (Recording is not
affected when screen is off).
Setting for activating audio
in the video.
Enable / disable power-on
sound and key tone.
Adjust the sound volume.
Save respective video files
in a length of the selected
duration.
If one of parking mode is
activated, the camcorder
will enter parking mode 10
seconds after disconnect
the external power.
If Collision Detection is
activated, this camcorder
starts emergency recording
once it detects any collision.
When Driver Fatigue Alert is
enabled, audible alert and
screen message will be
activated 1 hour after the
camcorder is powered on,
with a repetition every 30
minutes.
50
Available option
1920x1080 30fps HDR
1920x1080 27.5fps HDR
1280x720 30fps HDR
1280x720 27.5fps HDR
Press the /
to set the exposure value.
It can be set between -2 ~
+2
On/ Turn off after 7 sec /
Turn off after 1min/ Turn off
after 3min
On / Off
On / Off
Press the /
to set the volume. It can be
set between 0 ~ 10.
30 sec. / 1 min. / 3 min.
Off/ Park Recording /
Motion and Collision
Detection / Timelapse
High Sensitivity / Normal
Sensitivity / Low Sensitivity
/ Off
On / Off
button
button