Advertisement
1. Disassembly of Back cover
(1) Remove screw in the set
(2) Check both right/left hole
(3) Attach tape to 'Long nose pliers'
(4) Put 'long nose' into the hole
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
DISASSEMBLY
(5) Open B/C with push/pulling long nose to upper and lower
sides.
(6) Disassemble Back cover
* Disassemble it from left to right for top side hook on Back
cover
2. Back cover hole size & Long nose spec
▶ B/C Hole size
- w : 4.6 mm
- t : 3.5 mm
▶ Tool spec
- Long nose pliers
- Needle nose pliers
- 36 -
t 3.5
LGE Internal Use Only
W < 4.0mm
t< 3.0mm
Advertisement
