Network Bullet Camera·Quick Start Guide
5. Align the hook on the base holder with the slot on the device base
and insert the hook in the slot.
6. Slide down the device to fix the device on the holder.
7. Connect to power via Micro USB Interface.
8. Adjust the surveillance angle by rotating two ends of the bracket.
Adjust two ends of the bracket to adjust the angle of the device.
The adjustment angle of the whole device ranges from -46° to 46°
in pan position, -80° to 46° in tilting position, and 0° to 360° in
rotation position.
Note:
The actual angle adjustment of the device is subject to the actual
installation situation.
Figure 2-4 Fix the Device on the Wall
19