Remove The Base Assembly For Vesa Mounting - Philips S-line 220S4L User Manual

2. Setting up the monitor
Height adjustment
(220S4LC/220S4LY)
Pivot
(220S4LC/220S4LY)
110mm
90°
0°
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
220S4LS/220S4LA
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Use a flathead screwdriver to remove four
mylars from the hinge cover.
3. Remove the screws from hinge cover.
9