Gigabyte GA-7VKMLE User Manual page 48

F IDE2 Conductor Cable
8Auto
8ATA66/100
8ATA33
FOn Board F DC
Set On Board FDC is Auto (Default Value).
8Auto
Disabled On Board FDC.
8Disabled
Enabled On Board FDC.
8Enabled
FOnboard Serial Port 1
BIOS w ill automatically setup the port 1 address (Default Value).
8Auto
Enable onboard Serial port 1 and address is 3F8.
83F8/COM1
Enable onboard Serial port 1 and address is 2F8.
82F8/COM2
Enable onboard Serial port 1 and address is 3E8.
83E8/COM3
Enable onboard Serial port 1 and address is 2E8.
82E8/COM4
Disable onboard Serial port 1.
8Disabled
FOnboard Serial Port 2
BIOS w ill automatically setup the port 2 address. (Default Value)
8Auto
Enable onboard Serial port 2 and address is 3F8.
83F8/COM1
Enable onboard Serial port 2 and address is 2F8.
82F8/COM2
Enable onboard Serial port 2 and address is 3E8.
83E8/COM3
Enable onboard Serial port 2 and address is 2E8.
82E8/COM4
Disable onboard Serial port 2.
8Disabled
FOnBoard Parallel port
Enable On Board LPT port and address is 378.
8378
Enable On Board LPT port and address is 278.
8278
Enable On Board LPT port and address is 3BC.
83BC
Set On Board LPT port is Auto. (Default Value)
8Auto
Disable On Board LPT port.
8Disabled
GA-7VKMLE Motherboard
Will be automatically detected by BIOS. (Default Value)
Set IDE2 Conductor Cable to ATA66/100 (Please make sure y our IDE
dev ic e and cable is compatible w ith ATA66/ 100).
Set IDE2 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice
and c able is c ompatible w ith ATA33).
- 44 -