Page 1
Adap ng to Your Environment Clear Ice Machines Wine Refrigerators Beverage Centers Drawers • • • • 24" Beverage Center/ Glass Door Refrigerator Operator’s Manual SBCR24 Indoor & ADA Models SapphireAppliances.com | 866.754.6672...
Page 2
WARNING California Proposition 65 Certain components in this product and its related accessories contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. PRODUCT REGISTRATION INFORMATION Please record your model’s information. You will need to know this information whenever you call to request information or ser- vice.
SAFETY SAFETY DEFINITIONS The words DANGER, WARNING, CAUTION and NOTICE are used throughout this manual to highlight important information. Be certain that the meanings of these alerts are known to all who operate and install the appliance. DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Page 6
SAFETY INSTALLING PRECAUTIONS • Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. • To avoid a hazard due to instability of the appliance, the appliance must be installed in accordance with the instructions. MOVING PRECAUTIONS •...
Page 7
SAFETY • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • Do not damage the refrigerant circuit. THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED.
INSTALLING THE UNIT WARNING Fire/Explosion Hazard DO NOT install in spaces containing gasoline engines, fuel tanks or fuel line fi ttings. This device does not meet federal requirement for ignition protection. IMPORTANT: Electrical Tips • This appliance must be installed with all electrical connections in accordance with state and local codes. •...
Page 10
INSTALLING THE UNIT Factors Aff ecting the Unit OTE: Do not use an appliance intended for indoor use outside. Only use an appliance that is intended for outdoor use outdoors. • Never keep the appliance next to ovens, grills or other high-heat resources. •...
INSTALLING THE UNIT REQUIRED CABINET OPENING WARNING Fire/Explosion Hazard DO NOT install in spaces containing gasoline engines, fuel tanks or fuel line fi ttings. This device does not meet federal requirement for ignition protection. Failure to comply could result in injury or death.
INSTALLING THE UNIT SAPPHIRE 24-INCH ADA HEIGHT-COMPLIANT BUILT-IN CABINET DIMENSIONS Recommended location for electrical connection in either adjacent cabinet. " " " " 7.00" (177 mm) 24.00" (610 mm) NOTICE • If you remove the rubber feet from the bottom of the unit, reinstall the mounting screws into the bottom of the cabinet to avoid damage to components mounted to the base pan.
INSTALLING THE UNIT ELECTRICAL CONNECTION Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, you must properly ground this appliance. The power cord of this appliance features a three-prong grounding plug that mates with a standard three-prong grounding wall outlet to minimize the possibility of electric shock hazard from the appliance.
INSTALLING THE UNIT AVOIDING USE OF EXTENSION CORDS Because of potential safety hazards under certain conditions, the manufacturer strongly recommends that you do not use an extension cord with this appliance. LEVELING THE UNIT The appliance requires leveling before it can work properly. If necessary, raise or lower the unit by turning the four leveling feet on the bottom.
INSTALLING THE UNIT REVERSING THE DOOR This appliance has the capability of the door opening from either the left or right side. The appliance is delivered to you with the door opening from the left side. Follow these instructions should you desire to reverse the opening direction: 1.
INSTALLING THE UNIT 5. Lift the door off the partially loosened right-side screws. Rotate the door and position it on the two partially installed left-side screws. 6. Finish removing the outer top and bottom screws from the right-side hinges. Install these screws in the open holes in the left-side hinge location.
INSTALLING THE UNIT INSTALLING THE CUSTOM DOOR PANEL 1. Remove the door from the unit. 2. Remove the door seal to gain access to the custom door panel mounting holes. 3. Align the top of the custom door panel fl ush with the top of the door. 4.
INSTALLING THE UNIT ANTI-TIP SYSTEM 1. On built-in installations, once the appliance is in place and leveled, secure the two anti-tip brackets underneath the countertop using two screws (provided). 2. If the brackets for the anti-tip system cannot be secured above the appliance and no wood is available, the brackets for the anti-tip system can be relocated to the side of the appliance for securing into an adjacent cabinet.
OPERATING THE UNIT USING THE CONTROLS The control panel is located at the top of the appliance. OTE: You have 30 seconds to make a control change before the display reverts to the default screen. OTE: The clock time only displays if the user has set the NIGHTLIGHT function; otherwise the clock time does not appear on the screen.
Page 23
OPERATING THE UNIT 4. Scroll to the next menu item by pressing the DOWN ARROW button ( 5. Scroll to the next menu item by pressing the DOWN ARROW button ( 6. To exit the menu, press the ENTER button ( OTE: Once you select a menu item, the system takes you directly to that particular setting.
OPERATING THE UNIT LIGHTING OPTIONS 1. To adjust the lighting, press the ENTER button ( ) to access the menu. 2. The fi rst menu item is LIGHTING OPTIONS. Press the ENTER button ( 3. Press the DOWN arrow ( ) to reach the desired setting.
OPERATING THE UNIT 4. To return back to the main menu, scroll down by pressing the DOWN ARROW ( ) and then press the ENTER button ( LIGHTING OPTIONS - SCHEDULING NIGHTLIGHT 1. To schedule the nightlight setting, press the ENTER button ( ) to access the menu.
Page 29
OPERATING THE UNIT 12. Once the time is properly set, set the START TIME HOUR for the SCHEDULE NIGHTLIGHT by pressing the UP or DOWN ARROW buttons. 13. Using the UP / DOWN ARROW buttons, set the START TIME HOUR. 14.
Page 31
OPERATING THE UNIT 18. Once the AM / PM is set, press the ENTER button ( 19. Once the start time is properly set, set the END TIME HOUR for the SCHEDULE NIGHTLIGHT by pressing the UP or DOWN ARROW buttons. 20.
Page 33
OPERATING THE UNIT 24. Using the UP / DOWN ARROW buttons, select END TIME AM / PM. 25. Once the AM / PM is set, press the ENTER button ( 26. SCHEDULE NIGHTLIGHT is now set and the display will show the default temperature screen with the crescent moon icon and the time set.
OPERATING THE UNIT LIGHTING OPTIONS - TURNING NIGHTLIGHT OFF 1. To turn off the NIGHTLIGHT setting, press the ENTER button ( ) to access the menu. 2. The fi rst menu item is LIGHTING OPTIONS. Press the ENTER button ( 3.
OPERATING THE UNIT 3. Press the DOWN ARROW button ( ) to reach the desired setting. 4. The default unit setting is DEGREES FAHRENHEIT (°F). To maintain the DEGREES FAHRENHEIT (°F) setting, press the ENTER button ( OTE: DEGREES FAHRENHEIT (°F) is the default setting and displays in increments of 1 degree. DEGREES CELSIUS (°C) displays in increments of 0.5 degrees.
Page 37
OPERATING THE UNIT 2. Scroll down to the ENTER SABBATH MODE setting. 3. Press the ENTER button ( 4. The display shows nothing but is still running and in SABBATH MODE. The display shows nothing, but the unit maintains the set temperature during the ENTER SABBATH MODE cycle until cancelled. OTE: Door opening or closing will result in a 20-second delay with compressor, fan or damper function.
OPERATING THE UNIT EXITING OR CANCELLING SABBATH MODE 1. To exit or cancel SABBATH MODE, press the ENTER button ( 2. The display reverts back to the default screen. OTE: The clock time in the lower right of the display appears ONLY if the clock time has been set in the NIGHTLIGHT function. Otherwise, no time will appear on the screen.
OPERATING THE UNIT 2. Press the DOWN ARROW button ( ) to change / adjust temperature lower. 3. Press the UP ARROW button ( ) to change / adjust temperature higher. OTE: You do not need to press the ENTER button. The new setting will remain unless changed. DEFAULT TEMPERATURE The default temperature is 38°F.
OPERATING THE UNIT CLEARING SIMPLE ERROR CODES The DOOR OPEN alert sounds and shows DOOR OPEN in the display. The alert automatically clears when you properly close the door. OTE: The audible alert emits three beeping sounds that occur every 30 seconds after the door has remained open for more than 2 minutes.
OPERATING THE UNIT MANUALLY CLEARING TEMP OUT OF RANGE ERROR CODE 1. To manually clear the TEMP OUT OF RANGE alert, press the ENTER button ( 2. The display shows CLEAR TEMP ALERT?. Press the ENTER button ( 3. The display reverts back to the default display and the TEMP OUT OF RANGE alert clears. OTE: If the unit does not meet the set temperature within 12 hours, the TEMP OUT OF RANGE alert will initiate again.
OPERATING THE UNIT EXPECTING NORMAL SOUNDS Your new appliance may make sounds that are not familiar to you. Hard surfaces like the fl oor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and the source of those sounds: •...
CARE AND MAINTENANCE WARNING Electrical Shock Hazard Always disconnect power at the source before working on the unit. Failure to unplug the appliance could result in electrical shock or personal injury. • Do not touch the power plug when your hands are wet. •...
CARE AND MAINTENANCE EXTENDED PERIODS OF NON-USE WARNING Electrical Shock Hazard Always disconnect power at the source before working on the unit. OTE: Do not winterize this unit with ANY type of anti-freeze; damage to the mold coating will occur, invalidating product’s Limited Warranty and creating potential health hazards.
Page 45
CARE AND MAINTENANCE CAUTION Sharp Object Hazard DO NOT touch the condenser surface. The condenser has sharp edges and can be easily damaged. A dirty or clogged condenser prevents proper airfl ow and causes higher-than-recommended operating temperatures that may lead to component failure. Clean the condenser or have it cleaned at least once every six months.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS • The appliance does not operate. • Power failure. • Plug in the appliance. • Appliance not plugged in. • Replace blown fuse or reset circuit breaker. • House fuse blown or circuit breaker tripped. •...
DISPOSING THE UNIT This symbol on the product or its packaging indicates that you cannot treat this product as normal domestic trash; you must hand it in to a collection point for recycling electric and electronic appliances. Your contribution to the correct disposal of this product protects the environment. Contact your local municipal authority if you need more information about recycling this product.
WARRANTY LIMITED WARRANTY COVERAGE The Legacy Companies, warrants to the original purchaser of its SAPPHIRE products that they will be free from defects in materials and workmanship for the following time periods from the date of purchase shown on the sales receipt: Two (2) year Parts &...
Page 49
WARRANTY CONSUMABLES: This warranty does not include consumable parts such as water fi lters and light bulbs. ADJUSTMENTS & CALIBRATIONS: Adjustments including calibrations, leveling, tightening of fasteners, or utility connections normally associated with the original installation are the responsibility of the dealer, installer or the end user and not the responsibility of SAPPHIRE or The Legacy Companies and will not be considered warranty issues for this Limited Warranty.
Need help?
Do you have a question about the SBCR24 and is the answer not in the manual?
Questions and answers