Chipset Features Setup - Gigabyte GA-7IXE User Manual

Chipset Features Setup

( C ) 1998 American Megatrends, Inc. All Rights Reserved
**** SDRAM Timing ****
Config SDRAM Timing
*SDRAM PH Limit
*SDRAM Idle Cycle Limit
*SDRAM TRC Bank Cycle Time
*SDRAM TRP SRAS Precharge
*SDRAM TRAS Timing
*SDRAM CAS Latency
*SDRAM TRCD Timing
DRAM Integrity Mode
Memory Hole
DRAM Burst Refresh
Graphics Aperture Size
USB Function
USB KB Legacy Support
*These seven items will be available when Config SDRAM Timing is set to Manual.
Config SDRAM Timing
Set Config SDRAM Timing to Auto. (Default value)
Auto
Manual Set Config SDRAM Timing to Manual.
SDRAM PH Limit
This function specify the number of consecutive Page-Hit requests to allow before
choosing a non-Page-Hit request.
1 Cycles
4 Cycles
32 Cycles
64 Cycles
AMIBIOS SETUP – CHIPSET FEATURES SETUP
Auto
32 Cycles
8 Cycles
7 Cycles
2 Cycles
5 Cycles
2 Cycles
2 Cycles
Disabled
Disabled
Enabled
64MB
Enabled
Disabled
Figure 5: Chipset Features Setup
Set SDRAM PH Limit to 1 Cycles.
Set SDRAM PH Limit to 4 Cycles.
Set SDRAM PH Limit to 32 Cycles. (Default value)
Set SDRAM PH Limit to 64 Cycles.
ESC: Quit
F1 : Help PU/PD+/-/ : Modify
F5 :Old Values(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
34
BIOS Setup
: Select Item