Pnp/Pci Configuration - Gigabyte GA-6VXE7+ User Manual

4.9. PNP/PCI CONFIGURATION

Figure 4.6: PNP/PCI Configuration
IRQ[3.4.5.7.9.10.11.12.14.15] & DMA[0.1.3.5.6.7]These items will show up
when "Resources Controlled By" is Manual.
PNP OS Installed
The default value is No.
Yes Enable PNP OS Installed function.
No Disable PNP OS Installed function.
Resources Controlled by
The default value is Auto.
Manual User can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
Auto BIOS automatically use these PnP rescuers.
Reset Configuration Data
The default value is Disabled.
Disabled Disable this function.
ESCD Enable clear PnP information in ESCD.
DMI Enable clear PnP information in DMI.
BOTH Enable clear PnP information in ESCD and DMI.
4-19
BIOS Configration