Assembling And Preparing; Unpacking - LG MT40 Series Owner's Manual

4

ASSEMBLING AND PREPARING

NOTE
y Image shown may differ from your TV.
y
y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y
y The available menus and options may differ from the input source or product model that you are using.
y
y New features may be added to this TV in the future.
y
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where
you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
y Do not use any pirated items to ensure the safety and product life span.
y
y Any damages or injuries by using pirated items are not covered by the warranty.
y
y Some models have a thin film attached on to the screen and this must not be removed.
y
NOTE
y The items supplied with your product may vary depending on the model.
y
y Product specifications or contents of this manual may be changed
y
without prior notice due to upgrade of product functions.
y For an optimal connection, HDMI cables and USB devices should have
y
bezels less than 10 mm thick and 18 mm width. Use an extension cable
that supports USB 2.0 if the USB cable or USB memory stick does not fit
into your TV's USB port.
y Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
y
not display or a connection error may occur.
y Recommended HDMI cable types
y
- High-Speed HDMI
®
- High-Speed HDMI
®
/™ cable
/™ cable with Ethernet
B
A A
*A 10 mm
*B 18 mm
B