Advertisement
ALL-ROUND Flashlight Expert
Note: When using the SRT6 in infinite brightness mode, runtime will
increase when lower levels of output are selected. On its lowest setting,
the SRT6 will run continuously for up to 200 hours and on its highest
setting continuously for up to one hour and 45 minutes.
NB:
1. For user safety and to prevent overheating / failure, the SRT6 will
automatically switch to high mode after twenty minutes of use in Turbo
mode. Slowly rotate the Smart Selector Ring or press the tail switch
again to reactivate turbo mode when needed.
2. When the SRT6 is switched on standby mode, it will consume small
amounts of power to maintain the settings in the MCU (micro control
unit) but appear to be turned off. The power indicator on the light head
will blink once every two seconds to indicate the SRT6 is in standby
mode and to act as a locator.
Power Tips
1. With the light switched on, the power indicator will blink once every two
seconds when power levels reach 50%.
2. With the light switched on, the power indicator will blink rapidly when
power levels are low.
Changing Batteries
When the power indicator blinks rapidly it means the batteries need to be
replaced. Alternatively if the light becomes dim or unresponsive to
adjustment this also indicates batteries need to be replaced.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
®
Warranty Service
All NITECORE ® products are warranted for quality. DOA / defective
products can be exchanged for replacement through a local
distributor/dealer within the 14 days of purchase. After 14 days, all
defective / malfunctioning NITECORE ® products will be repaired free of
charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts. The
warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
To guarantee a swift and effective customer service, Nitecore suggest
you to contact the point of purchase for assistance.
For the latest information on NITECORE ® products and services, please
contact your national NITECORE ® distributor or send an email to
service@nitecore.com
The Nitecore official website shall prevail in case of any product data
changes.
SYSMAX Industry Co., Ltd.
TEL:
FAX:
E-mail:
Web:
Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Thanks for purchasing NITECORE!
unauthorized parties.
Please follow our facebook for more info: NITECORE Flashlights
+86-20-83862000
+86-20-83882723
info@nitecore.com
www.nitecore.com
Guangzhou, China 510600
Advertisement
