Table of Contents
Advertisement
setting up your dishwasher
Be sure to have your installer follow these instructions closely so that your new
dishwasher works properly and that you're not at risk of injury when washing
dishes.
unPACkInG your DIshWAshEr
• Once your new dishwasher has been delivered to you, carefully unpack it and check for any damage.
If the dishwasher has been damaged, make note of it on the waybill and keep a copy. Do not install the
dishwasher, and call your Samsung Service Centre referring to the back of the cover.
• If there is no damage to the product, you can proceed with the installation. If you are going to install it
yourself, make sure to read through the installation guide and follow the directions inside.
• After unpacking your dishwasher, keep the packaging out of the reach of children to ensure their safety.
ChECkInG PArTs
When your dishwasher has been unpacked, make sure you've received all the parts shown below.
If your dishwasher was damaged during shipping, or if you do not have all the parts,
contact samsung service Centre referring to the back of the cover.
plinthfacia
(Dms600TI/D151sTs/D151W)
UserManual-DMS400TH_EN.indd 9
(Refer to the "Detailed part names and images" section)
Kick plate (Dms400Th)
591 mm
589 mm
plinthfacia lower rubber
Top table
(Dms600TI/D151sTs/D151W)
pU foam tape
25 mm
Kick plate rubber
0~75 mm
setting up your dishwasher _9
1/27/2012 5:09:50 PM
Advertisement
Table of Contents
