Table of Contents
Advertisement
Available languages
Available languages
The climate classification can be found on the identification plate
located on the outside of the appliance at the back. The table to
the side here shows which ambient temperature is assigned to which
climate classification:
SN 10 to 32°C
N
16 to 32°C
ST 18 to 38°C
T
18 to 43°C
Test room
Dry bulb
climate class
20°C
0
1
16° C
2
22° C
3
25° C
4
30°C
5
40° C
6
27° C
7
35° C
30
Relative
Water weight
Dew point
humidity
in dry air
50%
9.3°C
7.3 g/kg
80%
12.6°C
9.1 g/kg
65%
15.2°C
10.8 g/kg
60%
16.7°C
12 g/kg
55%
20.0°C
14.8 g/kg
40%
23.9°C
18.8 g/kg
70%
21°C
15.8 g/kg
75%
30°C
27.3 g/kg
7
Start-up
7.1 Before starting up for the first time
After transportation the appliance should be left to stand for at least
24 hours so that the refrigerant can collect in the compressor. Non-
observance of this may damage the compressor and so lead to the
appliance malfunctioning. In such a case the warranty becomes invalid.
Clean the interior of the refrigerator and all of the accessories to
be found here with commercially available, mild cleaning products.
WARnInG: Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
cAuTIon: Please take care that the bottom of appliance is not
completely covered by bottles in order that the condensation drain is
not disrupted. It is best to put the bottles on a shelf.
The shelf can withstand the maximum load 4.5 kg.
7.2 connecting the appliance to the mains supply
IMPoRTAnT
It is imperative that the appliance be earthed according to
the directions. For this purpose the plug of the connecting
cable is provided with the appropriate contact.
IMPoRTAnT
Call a specialist electrician if the plug does not fit into the
socket. Do not try to force the plug into the socket.
IMPoRTAnT
If you disconnect the appliance from the mains supply, or
if a power cut occurs: wait for 5 minutes before you restart
the appliance.
31
Advertisement
Chapters
Table of Contents
