Frigidaire FCRE3052AS Use & Care Manual page 37

Electric range
Hide thumbs Also See for FCRE3052AS:
Table of Contents

Advertisement

Oven light does not work.
Convection fan does not rotate.
Surface element is too hot or not
hot enough.
Surface element does not heat or
does not heat evenly.
Scratches or abrasions on
cooktop surface.
Metal marks on the cooktop.
Brown streaks or specks on
cooktop surface.
Appliance is not level.
Cannot move appliance easily.
Appliance must be accessible for
service.
Entire appliance does not
operate.
Be sure the oven light is secure in the socket. See
page
34.
Oven door is open. Convection fan will turn off if oven door is opened when convec-
tion is active. Close oven door.
Incorrect surface control setting. Adjust power level setting.
Be sure the correct surface control knob is turned on for element needed.
Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavy-
weight cookware. Flat pans heat better than warped pans. Cookware materials and
weight of the material affect heating. Heavy and medium-weight pans heat evenly.
Because lightweight pans heat unevenly, foods may burn easily.
Coarse particles such as salt or hardened soils between cooktop and utensils can
cause scratches. Be sure cooktop surface and bottoms of utensils are clean before
usage. Small scratches do not affect cooking and will become less visible with time.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
Apply the recommended CookTop® Cleaning Creme to the ceramic surface. Buff with
a non-abrasive cloth or sponge.
Cookware with rough bottom was used. Use smooth, flat-bottomed cookware.
Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils
on cooktop surface. Apply the recommended CookTop® Cleaning Creme to the
ceramic surface. Buff with a non-abrasive cloth or sponge. For more information, see
"Cooktop Maintenance (cont'd)"
Boil overs are cooked onto surface. Use razor blade scraper to remove soil. For more
information see
"Cooktop Maintenance"
Be sure floor is level, strong, and stable enough to adequately support range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Adjust leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to make
appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can be lifted
over carpet.
Make sure power cord is plugged properly into outlet.
Electrical power outage. Check house lights to be sure. Call your local electric
company for service outage information.
Service wiring is not complete. Call 1-800-4-MY-HOME® for assistance (See back
cover).
BEFORE YOU CALL
"Replacing the Oven Light"
on
page
32.
on
page
31.
on
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents