Mounting On A Table - LG 24MP60VQ-P.AUS Owner's Manual

CAUTION
Illustrations in this document represent
y y
typical procedures, so they may look
different from the actual product.
Do not carry the monitor upside down by
y y
just holding the stand base. This may cause
the monitor to fall off the stand and could
result in personal injury.
When lifting or moving the monitor, do not
y y
touch the monitor screen. The force applied
to the monitor screen may cause damage
to it.
Do not apply foreign substances (oils,
y y
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
Applying excessive force when tightening
y y
screws may cause damage to the monitor.
Damage caused in this way will not be
covered by the product warranty.
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (minimum) space from the
wall for proper ventilation.
100 mm
100 mm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
(19 V )
11
100 mm
100 mm
(19 V )