LG 49LW540S Owner's Manual page 24

17. Equalizer (Command : j v)
• Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
0 0 0
Frequency
7 6 5 Frequency
0 0 0
1st Band
0 0 1
2nd Band
0 1 0 3rd Band
0 1 1
4th Band
1 0 0
5th Band
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
- It depends upon model, and can adjust when
sound mode is EQ adjustable value.
18. Energy Saving (Command: j q)
• To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
05 : Screen off
(Depending upon model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
24
LSB
0 0 0 0 0
Data
4 3 2 1 0 Step
0 0 0 0 0
0(decimal)
0 0 0 0 1
1(decimal)
... ... ... ... ... ...
1 0 0 1 1
19(decimal)
1 0 1 0 0
20(decimal)
19. Tune Command (Command: m a)
- This command may work differently depending
upon model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
• Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
- Analog Antenna/Cable
[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
- Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
- Tune Command Examples:
1. Tune to the Analog antenna (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10