Gigabyte SiS 964 Install Manual page 7

Step 5:
If RAID 0 is selected, you'll have to decide whether you want the RAID array to be created automatically
or manually (Figure 8). Press 1 to select <1> Auto Create or 2 to select <2> Manual Create. (We
recommend selecting Auto Create to most users.)
Figure 8
Step 6:
When the next message appears, press Y if you wish to proceed to map and stripe all current data and
future data to the RAID disks. Otherwise press N to perform striping on future data only. Then press
ENTER (Figure 9).
Figure 9
- 7 - SATA Hard Drive Configurations (SiS 964)