Gigabyte SiS 964 Install Manual page 11

Step 4:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 15 below will appear.
Figure 15
Step 5:
Insert an empty floppy disk and press D to select D) SiS 964 SATA. Then it will take about one minute
to copy the SATA driver from the motherboard driver CD to the floppy disk.
Step 6:
Press 0 to exit when the procedure is complete (Figure 16). You have copied the SATA driver
successfully.
Figure 16
- 11 - SATA Hard Drive Configurations (SiS 964)