Fagoting; Tape Or Elastic Attaching - Brother Innov-is BQ2450 Operation Manual

SEWING THE STITCHES

Fagoting

When there is a space between two fabrics with
thread sewn over the space to join the fabrics
together, it is called fagoting. Use this stitch when
sewing blouses or children's clothes.
a
Baste two pieces of fabric onto thin paper,
leaving a space of 4 mm (approx. 3/16 inch)
between the fabrics.
* If you draw a line down the middle of the thin paper
or water-soluble stabilizer, sewing is easier.
a 4.0 mm (approx. 3/16 inch)
b Paper
c Basting stitches
b
Select or
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" on page S-67.
c
Attach presser foot "J". Align the center of
the presser foot with the middle of the
space between the fabrics and begin
sewing.
a Basting stitches
Memo
• Use a thick thread.
d
When sewing is finished, gently tear the
paper away.
S-52
.

Tape or Elastic Attaching

a
Select a straight stitch and attach presser
foot "J".
b
Set the stitch length to 4.0 mm (approx.
3/16 inch), and loosen the upper thread
tension to 2.0 (see "Setting the Stitch
Length" on page S-10 and "Setting the
Thread Tension" on page S-12).
Memo
• Be sure that neither automatic
reinforcement
cutting is selected.
c
Sew two rows of straight stitches on the
right side of the fabric, then pull the bobbin
thread to create the necessary gather.
Memo
• Before sewing the straight stitch, rotate the
handwheel toward you (counterclockwise)
and pull up the bobbin thread. Holding the
top and bobbin thread, pull a length of
thread out from the rear of the machine. (Be
sure that the presser foot is raised.)
d
Place the tape over the gather, and hold it
in place with basting pins.
a Tape
nor automatic thread