Connectivity Setup - Whirlpool WRF993FIFM00 User Manual

Connectivity Set-Up (on some models)
IMPORTANT: Proper installation of your refrigerator prior to use is your responsibility. Be sure to read and follow the User Instructions
that came with your refrigerator.
Automatic Setup Instructions—Wi-Fi Protected Setup (WPS)
You will need:
■ A home wireless router capable of Wi-Fi Protected Setup
(WPS). The router should be on and have a live Internet
connection.
■ The Smart Appliance ID (SAID) from your refrigerator which
can be found on a sticker on top of the control housing
located on top of the refrigerator.
NOTE: If your home wireless router is not equipped with a WPS
button, please check the user manual of your router to confirm
if it is WPS capable. If not, alternate set-up instructions are at
www.whirlpool.com/connect.
1.
Router setup
Press the WPS button on the router. An indicator light will
begin blinking.
HELPFUL TIP: The WPS function on your router is active
for 2 minutes. Complete the next step within that timeframe
or you will need to reinitiate WPS.
2.
Refrigerator setup
(time-sensitive step)
NOTE: Step 2 will happen after 30 seconds of power-up.
Touch and hold CUBED ICE and CRUSHED ICE together for
3 seconds to enable Wi-Fi.
The Wi-Fi status indicator on the refrigerator control panel
will blink slowly while your refrigerator and router attempt
to connect.
If the connection is successful, the Wi-Fi status indicator will
come on and remain lit.
If Your Refrigerator Doesn't Connect:
If your refrigerator and router fail to connect after 2 minutes,
the Wi-Fi status indicator will blink rapidly for 2 seconds and
then turn off. Refer to the "Troubleshooting—Connected
Models" section of this Use & Care Guide, check any
connection instructions for your specific router, and refer to
alternate instructions at www.whirlpool.com/connect or call
1-866-333-4591.
6
NOTE: If this is your first Smart Appliance, you will need to
download the Whirlpool App and create an online user account.
®
If you already have the app and a user account, please skip
ahead to Step 4 "Register your refrigerator in your user account."
3.
Download app and set up user
account
From your mobile device, smartphone, or tablet, go to
www.whirlpool.com/connect and follow the instructions
to download and install the Whirlpool
Once installed, tap the Whirlpool
You will be guided through the steps to set up a user account.
The app will make sure to get the necessary personal and home
information as well as information about your energy company.
4.
Register your refrigerator in your
user account
Registering your refrigerator in your account is a necessary
step in order for you to take full advantage of the Smart
Features. When prompted by the app, enter the Smart
Appliance Identification Number (SAID) (case sensitive)
which can be found on a sticker on top of the control
housing located on top of the refrigerator.
My Smart Appliance ID# is:
■ Once you've connected your refrigerator to your home
Wi-Fi network, it will remain linked even if the power goes
out, you move the appliance, or if you put it in storage for
a while.
■ If you replace your wireless router (or get a different Smart
Refrigerator), you will need to repeat this connectivity set-
up process.
App.
®
App icon to open the app.
®