GE Profile PSS27SHMDBS Owner's Manual And Installation page 10

About the shelves and bins. (cont.)
Not all features are on all models.
Press tab and pull shelf
forward to remove
10
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to
reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
To remove:
Slide the shelf out until it reaches the stop,
then press down on the tab and slide the
shelf straight out.
To replace or relocate:
Line the shelf up with the supports and slide
it into place. The shelf can be repositioned
when the door is at 90° or more. To
reposition the shelf, slide the shelf past the
stops and angle downward. Slide shelf down
to the desired position, line up with the
supports and slide into place.
Make sure you push the shelves all the way back
in before you close the door.
QuickSpace ™ Shelf
This shelf splits in half and slides under
itself for storage of tall items on the shelf
below.
This shelf can be removed and replaced
or relocated just like Slide-Out Spillproof
Shelves.
Freezer Baskets
To remove, push the basket all the way to the
back of the freezer. Lift up until the back
pins are disengaged. Lift the entire basket
up and pull out.
Slide-Out Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position, and
slide out.
Fixed Freezer Shelves
To remove, lift the shelf up at the left side
and then bring the shelf out.
On some models, this shelf can not be used
in the lowest position.
Make sure you push the baskets all the way back
in before you close the door.
Make sure you push the shelves all the way back
in before you close the door.