Installing The Ssd Cage - Asus RS300-E9-RS4 User Manual

2.8.5

Installing the SSD cage

Follow the steps below to install the SSD cage on your server module.
1. Remove the three screws on the side of
the SSD cage.
2. Lift the SSD cage and set aside.
3. With the SSD cage resting on a flat
surface, insert the SSD card into the
SSD cage.
• The SSD Card fits in one
orientation only.
• You can place two SSD cards
into the SSD cage.
4. Secure the SSD card into the SSD cage
with the bundled screws.
5. Connect the SATA power cable and the
SATA connector to the SSD card.
ASUS RS300-E9 Series
SATA connector
SATA Power cable
2-23