6VX7-4X Motherboard
•
OnBoard Serial Port 2
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
•
Serial Port 2 Mode
(This item allows you to determine which Serial Port 2 Mode of onboard I/O chip)
ASK IR
IrDA
Normal
•
Duplex Mode
Half Duplex
N/A
Full Duplex
•
On Board Parallel port
378
278
3BC
Auto
Disabled
•
Parallel Port Mode
EPP
ECP
Normal
•
Parallel Port DMA
Auto
3
1
0
BIOS will automatically setup the port 2 address. (Default Value)
Enable onBoard Serial port 2 and address is 3F8.
Enable onBoard Serial port 2 and address is 2F8.
Enable onBoard Serial port 2 and address is 3E8.
Enable onBoard Serial port 2 and address is 2E8.
Disable onBoard Serial port 2.
Set onboard I/O chip Serial Port 2 to ASK IR Mode.
Set onboard I/O chip Serial Port 2 to IrDA Mode.
Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
IR Function Duplex Half.
Disabled this function. (Default Value)
IR Function Duplex Full.
Enable On Board LPT port and address is 378.
Enable On Board LPT port and address is 278.
Enable On Board LPT port and address is 3BC.
Set On Board LPT port is Auto. (Default Value)
Disable On Board LPT port.
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port. (Default Value)
Normal Operation.
Set Auto to parallel port mode DMA Channel. (Default Value)
Set Parallel Port DMA is 3.
Set Parallel Port DMA is 1.
Set Parallel Port DMA is 0.
63