Using The Quilting Guide; Using The Quilting Foot - Brother PS100 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Note
● When sewing with the walking foot, sew at
medium to low speeds.

Using the quilting guide

Use the quilting guide to sew parallel stitches that are
equally spaced.
Insert the stem of the quilting guide into
1
the hole at the rear of the walking foot or
presser foot holder.
■ Walking foot
Adjust the stem of the quilting guide so
2
that the quilting guide aligns with the
seam that has already been sewn.

Using the quilting foot

Stitch Name
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Left Needle
Position)
The Quilting Foot is useful for darning and
free-motion machine quilting.
■ Presser foot holder
Stitch Length
Pattern
[mm (inch)]
5
2.5 (3/32)
7
2.5 (3/32)
Follow the steps
1
Attach the quilting foot, making sure that
2
part A shown in the illustration is above
the needle clamp screw. Then lower the
presser foot lever and tighten the presser
foot screw.
• Make sure that the needle clamp screw is
firmly tightened.
1
CAUTION
●
Use the oval screwdriver to tighten the
presser foot holder screw securely. If the
screw is loose, the needle may hit the
presser foot and you may be injured.
●
Turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
Put the darning plate on the needle plate.
3
Turn on the machine.
CAUTION
●
Do not turn on the machine while
pressing down the foot controller.
Other
Set the pattern selection dial to the
4
Straight Stitch.
Darning
Plate
• Before starting to sew, draw the quilting
design on the fabric.
Darning
Plate
to on page 33.
1 3
A
2
1 Presser foot screw
2 Needle clamp screw
5
34