Using Attachments And Applications; Zipper Insertion - Brother PS100 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5
USING ATTACHMENTS AND
APPLICATIONS
CAUTION
●
Always turn off the machine before replacing the presser foot. Otherwise, injuries may occur
if the foot controller is accidentally pressed and the machine starts sewing.

Zipper insertion

Stitch Name
Straight Stitch
(Center Needle
Position)
You can use the zipper foot "I" to sew different types of
zippers, and can easily position it to the right or left side
of the needle.
When sewing with the zipper on the right side, attach
the shank to the left pin of the zipper foot. When sewing
with the zipper on the left side, attach the shank to the
right pin of the zipper foot.
1
2
1 Right pin for sewing with the zipper on the left
side
2 Left pin for sewing with the zipper on the right
side
3 Needle drop point for sewing with the zipper
on the left side
4 Needle drop point for sewing with the zipper
on the right side
Prepare the fabric with the zipper basted
1
on the wrong side.
3
4
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
5 Zipper
Stitch
Pattern Length
[mm (inch)]
5
Zipper
2.5 (3/32)
Foot "I"
3
4
1
1
3
5
2
4
Turn off the machine.
2
Attach the zipper foot "I".
CAUTION
Foot
●
Turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the zipper foot before
you start sewing. Choosing a different stitch
will cause the needle to hit the presser foot
and break, and you may be injured.
Turn on the machine.
3
CAUTION
●
Do not turn on the machine while
pressing down the foot controller.
With the right side of the fabric facing up,
4
continue sewing with the zipper on the
right side of the presser foot.
1
1 End of zipper opening
2 Basting stitching
3 Zipper
• Sew the stitching in order, from 1 to 3.
CAUTION
●
Make sure the needle does not hit the
zipper during sewing. If the needle hits
the zipper, the needle may break and
you may be injured.
When you have finished sewing, remove
5
the basting stitching.
2
3
1
2
3
5
30