Chapter 2 : Preparation Before Threading; Thread Tree; How To Use The Thread Spool Cap; How To Use The Thread Net - Brother PS5234 Handbook

CHAPTER 2
PREPARATION BEFORE THREADING

Thread tree

Raise the telescoping thread tree to its highest
position. Make sure that the thread holders are in
alignment above the spool pins as illustrated
below.
1 Thread holder on thread tree
2 Spool pin
3 Correct position
1
2

How to use the thread spool cap

When using sewing thread spools, the thread
spool cap should be used as illustrated below.
Make sure that the spool notch is on the bottom.
1 Thread spool cap

How to use the thread net

If you are sewing with loosely spun nylon thread,
we recommend that you cover the spool with the
net supplied to prevent the thread from slipping off
the spool.
Adapt the net to the shape of the spool.
12
3

Before threading

1. Turn off the main power and light switch for
safety.
2. Raise the presser foot using presser foot lever.
3. Turn the hand wheel so that the mark on the
hand wheel <A> is aligned to the line <B> on
the machine. (See CHAPTER 1 "Turning
direction of hand wheel".)
<A>
<B>