Hard; Medium; Soft - Makita XWT08 Instruction Manual

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening Standard bolt
capacities
High tensile
bolt
Square drive
Drive shank
No load speed Impact mode
(RPM)

(Hard)

Impact mode

(Medium)

Impact mode

(Soft)

Impacts per Impact mode
minute (Hard)
Impact mode
(Medium)
Impact mode
(Soft)
Overall length
Rated voltage
Standard battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General power tool safety warnings
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
XWT07
M12 - M30 (1/2" - 1-1/4")
M10 - M24 (3/8" - 1")
19 mm (3/4")
BL1815N, BL1830,
BL1820, BL1840,
BL1820B BL1850,
BL1840B,
BL1850B
3.4 kg 3.7 kg
(7.6 lbs) (8.1 lbs)
XWT08
12.7 mm (1/2")
–
0 - 1,800 /min
0 - 1,000 /min
0 - 900 /min
0 - 2,200 /min
0 - 2,000 /min
0 - 1,800 /min
229 mm (9")
D.C. 18 V
BL1815N, BL1830,
BL1820, BL1840,
BL1820B BL1850,
BL1840B,
BL1850B
3.3 kg 3.6 kg
(7.3 lbs) (7.9 lbs)
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
2 ENGLISH
XWT09
M12 - M24 (1/2" - 1")
M10 - M22 (3/8" - 7/8")
–
11.1 mm (7/16") Hex.
BL1815N, BL1830,
BL1820, BL1840,
BL1820B BL1850,
BL1840B,
BL1850B
3.4 kg 3.7 kg
(7.6 lbs) (8.1 lbs)